MG 47NL Series Operating Manual
  1. Manuals
  2. Brands
  3. MG Manuals
  4. Measuring Instruments
  5. 47NL Series
  6. Operating manual
MG 47NL Series Operating Manual

MG 47NL Series Operating Manual

Loop powered digital panel meter (4 1/2 digit, led display type)
Hide thumbs Also See for 47NL Series:
Table of Contents

Advertisement

Quick Links

Download this manual
Digital Panel Meters 47NL Series
LOOP POWERED DIGITAL PANEL METER
(4 1/2 digit, LED display type)
Model: 47NLN
OPERATING MANUAL
MG CO., LTD. www.mgco.jp
47NLN EM-9563-B Rev.7
1
5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 47NL Series and is the answer not in the manual?

Questions and answers

Related Manuals for MG 47NL Series

Summary of Contents for MG 47NL Series

  • Page 1 Digital Panel Meters 47NL Series LOOP POWERED DIGITAL PANEL METER (4 1/2 digit, LED display type) Model: 47NLN OPERATING MANUAL MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 2: Table Of Contents

    3.4 STEP 4. DISPLAY SCALING SPAN ...................33 3.4.1 OPERATING PROCEDURE ...................33 3.5 STEP 5. DECIMAL POINT POSITION ................35 3.5.1 OPERATING PROCEDURE ...................35 4. OPERATION ..................37 5. PARAMETER CONFIGURATION ............38 MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 3 13. INSPECTION / CLEANING ..............68 14. TROUBLESHOOTING ................69 14.1 ERROR MESSAGES ......................69 14.2 INITIALIZING SETTING VALUES ..................69 14.2.1 OPERATING PROCEDURE .................69 14.3 CONFIRMING FIRMWARE VERSION ................71 14.3.1 OPERATING PROCEDURE .................71 MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 4 15.4 PARAMETER MAP ......................75 15.4.1 OPERATION IN MEASURING MODE ..............75 15.4.2 SCALING SETTING MODE .................. 76 15.4.3 ADVANCED SETTING MODE ................77 15.4.4 LOCKOUT SETTING MODE ................78 15.5 CHARACTER SET ......................79 MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 5: Introduction

    Ordering Information Sheet NXXXXX (included with the option code ‘/SET’ only) ■ MODEL NO. Confirm Model No. marking on the product to be exactly what you ordered. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 6: Safety Precautions (That Must Be Observed)

    • Using the unit continuously may result in a fire or electric shock. Do not throw the unit into the fire. • Doing so may result in rupture of the electronic component. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 7 • Doing so may result in electric shock, damage of the unit or injury. Do not use the unit in the atmosphere where combustible gas is present. • Doing so may result in inflammation, ignition or smoke. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 8: Points Of Caution

    • Fasten the body and panel together with four M4 × 10 screws (torque: 0.6 – 0.9 N·m). • After installation, confirm that there are no following abnormalities. – The packing is contorted. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 9 – The packing is run off the edge. – The packing is cut off. – There are foreign objects sticking. • When replacement of the watertight packing is needed, consult us. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 10: Component Identification

    • The engineering unit sticker label position is our recommended position. • When an engineering unit is specified by the Ordering Information Sheet, the unit(s) will be shipped with the sticker label put on the above position. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 11 • When a tag No. is specified, the unit(s) will be shipped with the tag No. sticker label put on the above position. Max. 17 alphanumeric characters can be specified. Please consult us. ■ BOTTOM VIEW NOTE Contents of the specification label depend on the specifications. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 12 ■ REAR VIEW MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 13: Installation

    Panel cutout must be such as specified by us. unit: mm (inch) unit: mm (inch) IMPORTANT Remove burrs from the panel cut surface so that they may not damage the wires. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 14 Unit xing screws (M4 x 10) IMPORTANT To conform to degree of protection IP66, confirm visually that the packing is not contorted, cut off or excessively run off the edge after installation. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 15 (1) Tear off a protective seal, and attach it to the unit. Body Wire Magnet label sheet (2) Attach the stopper to the unit to fix the wire. Stopper MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 16 • For magnet mounting, DO NOT use where it is subjected to continuous vibration or DO NOT subject the unit to physical impact. • The sheath of wire must be 2 mm or less. • Clustered Mounting unit: mm (inch) 96.0 (3.78) min. 120 (4.72) MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 17: Wiring Instructions

    Blade edge: 0.4 mm (0.02”) Blade width: 2 mm (0.08”) Procedures are as follows. (1) Insert a minus screwdriver into the dead end to open the spring. Minus screwdriver MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 18: Terminal Assignment

    • Take measures to prevent the sheath of wire from being caught in terminal(s) to avoid contact failure. • Pull the wire(s) lightly to confirm that the wire is not pulled off. 1.6.4 TERMINAL ASSIGNMENT Input signal MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 19: Wiring Input Signal

    Input Current Ground (resistance ‒ 100 ohms or less) ■ CONNECTION EXAMPLE • 2-WIRE • 4-WIRE Power source 4 – 20 mA (current loop supply) Input device MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 20: Basic Setting And Operation

    Input scaling: 0% input value (input scaling ZERO) and 100% input value (input scaling SPAN) Display scaling: 0% display value (display scaling ZERO) and 100% display value (display scaling SPAN) MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 21: Basic Setting Procedure

    Return to Measuring Mode (measurement started). • Hold down ↓ or Scale/↑ button for 3 seconds or more to apply the new setting and return to Measuring Mode. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 22: Basic Setting Operation And Instructions

    • Each time pressing Up button, the numeral is incremented by 1. • The negative sign (-) must be set to the leftmost digit. For example, set ‘-04.00’ instead of ‘-4.00’ . * Fifth digit MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 23 Press Up button to select a desired decimal point position. Press ↓ or Scale/↑ button to apply the new setting. • The next or previous parameter setting is indicated. *1 Display depands on the settings. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 24: Instructions On Basic Operation

    • If you get lost in a setting mode, you can execute initialization. (Refer to 14.2 INITIALIZING SETTING VALUES.) ■ ORDER TO DISPLAY PARAMETERS • Refer to 5. PARAMETER CONFIGURATION for details. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 25: Setting Scaling Values

    Display Display SPAN ZERO Display Scaling Display Scaling ZERO SPAN Input Input ZERO SPAN ZERO SPAN Input Scaling Input Scaling MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 26 Following pages describe operating procedures in each step to set the input scaling to 4 – 20 mA DC, and the display scal- ing to 0.0 – 1000.0 m³ as an example. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 27: Step 1. Input Scaling Zero

    Skip to Step 6 if the default value is acceptable. Press Shift button to shift the display into the setting standby mode. Blinking • The fifth digit starts blinking, to which you can apply changes. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 28 • Each time pressing Shift button, the blinking digit moves to the right. ■ SETTING A NUMERICAL VALUE * Fifth digit • Each time pressing Up button, the numeral is incremented by 1. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 29: Step 2. Display Scaling Zero

    Skip to Step 7 if the default value is acceptable. Press Shift button to shift the display into the setting standby mode. Blinking • The fifth digit starts blinking, to which you can apply changes. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 30 • Each time pressing Shift button, the blinking digit moves to the right. ■ SETTING A NUMERICAL VALUE * Fifth digit • Each time pressing Up button, the numeral is incremented by 1. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 31: Step 3. Input Scaling Span

    Skip to Step 7 if the default value is acceptable. Press Shift button to shift the display into the setting standby mode. Blinking • The fifth digit starts blinking, to which you can apply changes. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 32 • Each time pressing Shift button, the blinking digit moves to the right. ■ SETTING A NUMERICAL VALUE * Fifth digit • Each time pressing Up button, the numeral is incremented by 1. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 33: Step 4. Display Scaling Span

    Skip to Step 7 if the default value is acceptable. Press Shift button to shift the display into the setting standby mode. Blinking • The fifth digit starts blinking, to which you can apply changes. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 34 • Each time pressing Shift button, the blinking digit moves to the right. ■ SETTING A NUMERICAL VALUE * Fifth digit • Each time pressing Up button, the numeral is incremented by 1. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 35: Step 5. Decimal Point Position

    Skip to Step 7 if the default value is acceptable. Press Shift button to shift the display into the setting standby mode. Blinking • The indication starts blinking, to which you can apply changes. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 36 • “No decimal point” to “4 decimal places” can be selected in the decimal point position setting. SETTING VALUE FUNCTION SETTING VALUE FUNCTION No decimal point 3 decimal places (10 1 decimal place (10 4 decimal places (10 2 decimal places (10 MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 37: Operation

    Apply 20 mA input (100%) and make sure that 1000.0 m³ is indicated. NOTE When the indication is shifted with the function indicators off, perform Teach Calibration. (Refer to 12.1 TEACH CALIBRA- TION.) MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 38: Parameter Configuration

    ■ TRANSITION FROM EACH MODE TO MEASURING MODE Hold down ↓ or Scale/↑ button for 3 seconds or more to return to Measuring Mode. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 39 • The display depends on the settings and input. The above displays show default values. • Hold down ↓ or Scale/↑ button for 3 seconds or more to return to Measuring Mode from each parameter. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7...
  • Page 40 • The display depends on the settings and input. The above displays show default values. • Hold down ↓ or Scale/↑ button for 3 seconds or more to return to Measuring Mode from each parameter. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7...
  • Page 41 • The display depends on the settings and input. The above displays show default values. • Hold down ↓ or Scale/↑ button for 3 seconds or more to return to Measuring Mode from each parameter. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7...

  • Page 42: Averaging Input

    No. reaches the set value, all samples are averaged every 100 milliseconds. (2) After the sampling No. reaches the set value, a new sample is added to be averaged with the oldest one omitted. Such operation is repeated. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 43: Operating Procedure

    • Press Scale/↑ button, and the version indication will be indicated. Hold down ↓ or Scale/↑ button for 3 seconds or more to return to Measuring Mode. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 44: Eliminating Fluctuation Around "0

    • Low-end cutout has a deadband. With the low-end cutout value set to 50, for example, the indication will be cut to 0 when the measured value is less than 50, and will be restored when it is over 50. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7...

  • Page 45: Low-End Cutout

    Press ↓ or Scale/↑ button to go to the low-end cutout setting. • ‘ZOFF’ is indicated. • ‘Fnc’ indicator turns on. Press Shift or Up button to select ‘Z ON’. Blinking MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 46 Skip to Step 2 in “7.2 LOW-END CUTOUT VALUE” . ■ TO QUIT, Hold down ↓ or Scale/↑ button for 3 seconds or more to return to Measuring Mode. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 47: Low-End Cutout Value

    The low-end cutout value is indicated within the range of ‘Z000’ to ‘Z999’ depending on the setting. Press Shift button to shift the display into the setting standby mode. Blinking • The third digit starts blinking, to which you can apply changes. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 48 • Press Scale/↑ button, and the low-end cutout ‘Z ON’ will be indicated. Hold down ↓ or Scale/↑ button for 3 seconds or more to return to Measuring Mode. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 49: Adjusting Brightness Of Display

    ■ DISPLAY BRIGHTNESS DISPLAY FUNCTION DEFAULT VALUE Brightness level 1 (dark) Brightness level 2 Brightness level 3 (bright) ■ ADJUSTMENT IMAGE Increasing brightness Decreasing brightness Increasing brightness Decreasing brightness MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 50: Operating Procedure

    ‘C 1’ , ‘C 2’ or ‘C 3’ is indicated depending on the setting. Press Shift or Up button to select. Blinking • Select one among ‘C 1’ , ‘C 2’ and ‘C 3’ . MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 51 The low-end cutout ‘ZOFF’ will be indicated with the cutout set to OFF. Hold down ↓ or Scale/↑ button for 3 seconds or more to return to Measuring Mode. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 52: Going Back Automatically To Measuring Mode

    Disabled Scaling Setting Mode Enabled Advanced Setting Mode Enabled Lockout Setting Mode Enabled NOTE The setting time out error is ±5% or less of its set value. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 53: Operating Procedure

    • The second digit starts blinking, to which you can apply changes. Press Shift and Up buttons to set the setting time out. • Set within the range of ‘R 00’ to ‘R 99’ . MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 54 • Press Scale/↑ button, and the brightness ‘C 1’ , ‘C 2’ or ‘C 3’ will be indicated depending on the setting. Hold down ↓ or Scale/↑ button for 3 seconds or more to return to Measuring Mode. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7...

  • Page 55: Adjusting Display Refreshing Rate

    Refreshing rate 0.2 seconds Display value Measured value Minimum interval of display refreshing rate 50 milliseconds NOTE The display refreshing rate error is ±5% or less of its set value. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 56: Operating Procedure

    • The third digit starts blinking, to which you can apply changes. Press Shift and Up buttons to set the display refreshing rate. • Set within the range of ‘F00.0’ to ‘F99.9’ . MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 57 • Press Scale/↑ button, and the transition time to Lockout Setting Mode will be indicated within the range of ‘P 00’ to ‘P 99’ depending on the setting. Hold down ↓ or Scale/↑ button for 3 seconds or more to return to Measuring Mode. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 58: Useful Functions

    • Forced Zero cannot be executed or canceled while ‘S.ERR’ is indicated. Increase or decrease the input signal within the current range and then execute the Forced Zero again. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 59: Retaining Max And Min Values

    (3) The internal memory is reset for approx. 10 seconds after the input is removed and supplied again, and then the unit starts to measure MAX and MIN values again. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 60 • MAX and MIN values are not indicated while ‘S.ERR’ is indicated. Increase or decrease the input signal within the cur- rent range and then press Max/Min button again. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 61: Limiting Button Operation

    ‘SOFF’ or ‘S ON’ is indicated depending on the setting. Press ↓ or Scale/↑ button to go to the advanced setting lockout setting. • ‘DOFF’ is indicated. • ‘D/P’ and ‘Fnc’ indicators turn on. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 62 • Press Scale/↑ button, and the scaling setting lockout ‘SOFF’ or ‘S ON’ will be indicated depending on the setting. Hold down ↓ or Scale/↑ button for 3 seconds or more to return to Measuring Mode. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7...

  • Page 63: Transition Time To Lockout Setting Mode

    • The transition time to Lockout Setting Mode is indicated. • ‘D/P’ and ‘Fnc’ indicators turn on. NOTE The transition time is indicated within the range of ‘P 00’ to ‘P 99’ depending on the setting. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 64 • Press Scale/↑ button, and the setting time out will be indicated within the range of ‘R 00’ to ‘R 99’ depending on the set- ting. Hold down ↓ or Scale/↑ button for 3 seconds or more to return to Measuring Mode. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 65: User Calibration

    • In setting the input scaling ZERO and SPAN using actual inputs, carry out the Teach Calibration within the setting range. Do not set ‘input scaling ZERO ≥ input scaling SPAN’ in carrying out the Teach Calibration. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7...

  • Page 66: Operating Procedure

    Apply 0% input and press Up button to register the value. • The teach calibration (ZERO) is registered. • ‘Tch’ indicator turns ON. IMPORTANT Confirm that the input signal is stable before pressing Up button. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 67 Confirm that the input signal is stable before pressing Up button. Hold down ↓ or Scale/↑ button for 3 seconds or more to return to Measuring Mode. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 68: Inspection / Cleaning

    • Check the wiring periodically. In checking the wiring, for safety, interrupt electricity to the input. • Make sure periodically that the screws are fixed tightly. Loosened screws may cause drop of the unit. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7...

  • Page 69: Troubleshooting

    Lockout Setting Mode. • The scaling setting lockout is indicated. • ‘D/P’ and ‘Fnc’ indicators turn on. NOTE ‘SOFF’ or ‘S ON’ is indicated depending on the setting. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 70 Press ↓ or Scale/↑ button to execute the initialization. • The initialization will be completed in approx. 3 seconds and the display will return to Measuring Mode. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 71: Confirming Firmware Version

    • The above figures show the firmware version V1.00.0010. • The displays depend on the firmware version number. Hold down ↓ or Scale/↑ button for 3 seconds or more to return to Measuring Mode. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 72: Appendices

    75 g (2.6 oz) ■ PERFORMANCE Accuracy ±0.1% ±1 digit Temp. coefficient ±0.015%/°C (±0.008%/°F) ■ STANDARDS & APPROVALS EU conformity EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 RoHS Directive MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 73: Model Numbering

    [2] OPTIONS Blank: None /Q: With options (specify the specification) ■ SPECIFICATIONS OF OPTION: Q EX-FACTORY SETTING /SET: Preset according to the Ordering Information Sheet (No. ESU-9563) MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 74: Parameter List

    ---- lockout Forced zero OFF, ON ---- ---- lockout Initialization OFF, initialization ---- ---- *1 Conforms to decimal point position setting. NOTE: INDICATOR: = ON, = Blinking MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 75: Parameter Map

    • The display depends on the settings and input. • Forced zero cannot be executed or canceled when the operation is disabled with the forced zero lockout setting. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 76: Scaling Setting Mode

    -19999 to 19999 Decimal point Input scaling SPAN Teach calibration (SPAN) position 4.00 – 20.00 No decimal point, to 10 NOTE The display depends on the settings and input. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 77: Advanced Setting Mode

    • The display depends on the settings and input. • With the low-end cutout set to OFF, the low-end cutout value setting is locked. • Version indication is for indication only, not for setting. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 78: Lockout Setting Mode

    Scaling setting lockout OFF, ON Forced zero lockout Advanced setting lockout OFF, ON OFF, ON Initialization OFF, RST NOTE The display depends on the settings and input. MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 79: Character Set

    15.5 CHARACTER SET ■ NUMERALS AND NEGATIVE SIGN *1 Indication when the fifth digit is ‘-1’ . ■ ALPHABET MG CO., LTD. www.mgco.jp 47NLN EM-9563-B Rev.7 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

This manual is also suitable for:

47nln

Table of Contents