MG 47 Series Operating Manual
  1. Manuals
  2. Brands
  3. MG Manuals
  4. Measuring Instruments
  5. 47 Series
  6. Operating manual

MG 47 Series Operating Manual

Dc input digital panel meter (4 1/2 digit, process meter, led display type)
Hide thumbs Also See for 47 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
Digital Panel Meters 47 Series
DC INPUT DIGITAL PANEL METER
(4 1/2 digit, process meter, LED display type)
Model: 47LYV
OPERATING MANUAL
MG CO., LTD. www.mgco.jp
47LYV EM-9514-B Rev.6
1
5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 47 Series and is the answer not in the manual?

Questions and answers

Related Manuals for MG 47 Series

Summary of Contents for MG 47 Series

  • Page 1 Digital Panel Meters 47 Series DC INPUT DIGITAL PANEL METER (4 1/2 digit, process meter, LED display type) Model: 47LYV OPERATING MANUAL MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 2: Table Of Contents

    3.4 STEP 4. DISPLAY SCALING VALUE B ................36 3.4.1 OPERATING PROCEDURE ...................36 3.5 STEP 5. DECIMAL POINT POSITION ................38 3.5.1 DECIMAL POINT POSITION LIST .................38 3.5.2 OPERATING PROCEDURE ...................39 MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 3 12. INSPECTION / CLEANING ..............68 13. TROUBLESHOOTING ................69 13.1 ERROR MESSAGES ......................69 13.2 INITIALIZING SETTING VALUES ..................69 13.2.1 OPERATING PROCEDURE .................69 13.3 CONFIRMING FIRMWARE VERSION ................71 13.3.1 OPERATING PROCEDURE .................71 MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 4 14.4 PARAMETER MAP ......................77 14.4.1 OPERATION IN MEASURING MODE ..............77 14.4.2 SCALING SETTING MODE ..................78 14.4.3 ADVANCED SETTING MODE ................79 14.4.4 LOCKOUT SETTING MODE ................80 14.5 CHARACTER SET ......................81 MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 5: Introduction

    Ordering Information Sheet NXXXXX (included with the option code ‘/SET’ only) ■ MODEL NO. Confirm Model No. marking on the product to be exactly what you ordered. MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 6: Safety Precautions (That Must Be Observed)

    • Using the unit continuously may result in a fire or electric shock. Stop using the unit if it is dropped or damaged. • Using the unit continuously may result in a fire or electric shock. MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 7 • Doing so may result in inflammation, ignition, or smoke. Do not cover the ventilation slits with cables, etc. • Doing so may result in malfunction or heating. MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 8: Points Of Caution

    • Be sure to confirm the name and polarity of each terminal before wiring to the terminal block. • Do not connect anything to unused terminals. • Be sure to attach the terminal cover to prevent electric shock. MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 9 – There are some spaces between front panel and panel. – The packing is run off the edge. – The packing is cut off. – There are foreign objects sticking. MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 10: Component Identification

    • The engineering unit sticker label position is our recommended position. • When an engineering unit is specified by the Ordering Information Sheet, the unit(s) will be shipped with the sticker label put on the above position. MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 11 • When a tag No. is specified, the unit(s) will be shipped with the tag No. sticker label put on the above position. Max. 17 alphanumeric characters can be specified. Please consult us. MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6...
  • Page 12 • The connection diagram depends on the specifications. • The MODEL shows the same as that in the specification label on the top of the unit. • Without Terminal Cover Terminal block (separable) Strap MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 13: Installation

    10–M3 SCREW TERMINAL 6.6 (.26) 2–M3 SCREW 91.5 (3.60) 1.5.2 PANEL CUTOUT DIMENSIONS + 0.8 unit: mm – 0 min. 120 Panel thickness: 1.6 to 8.0 mm MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 14: Installation

    (a) Flip a tab of a bracket. (b) Then pull the bracket toward the terminal block to remove it. Bracket (3) Put the terminal cover through the panel cutout. Panel Terminal cover MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 15 Fixing groove IMPORTANT To conform to degree of protection IP66, confirm visually that the packing is not contorted, cut off or excessively run off the edge after installation. MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 16: Wiring Instructions

    • In using non-insulated solderless terminals, cover them with insulating caps or tubes. • Ring tongue terminals are recommended rather than spade tongue terminals to prevent from falling off. 1.6.3 TERMINAL ASSIGNMENT Input signal Power MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 17: Wiring Input Signal

    Ground the input shield to the most stable earth to prevent noise troubles. • Do not connect anything to unused terminals. Input – voltage Ground (resistance 100 ohms or less) ‒ DC current ‒ MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 18: Wiring Power

    • Use wires as thick as possible and twist them from the end. • For DC power, confirm the polarity. Power U(+) V(–) AC power DC power ‒ MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 19: Installing/Separating Terminal Block

    Fit the convex part A of the meter in the concave part B of the terminal cover and push the cover until it clicks into place. Terminal cover MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 20 (b) Pull the handle upward. (c) Then insert the screwdriver into a hole at the lower right corner. (d) Pull the handle upward to separate the terminal cover. Terminal cover MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 21: Basic Setting And Operation

    Input scaling: 0% input value (input scaling value A) and 100% input value (input scaling value B) Display scaling: 0% display value (display scaling value A) and 100% display value (display scaling value B) MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6...

  • Page 22: Basic Setting Procedure

    Return to Measuring Mode (measurement started). • Hold down Alarm/↓ or Scale/↑ button for 1 second or more to apply the new setting and return to Measuring Mode. MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 23: Basic Setting Operation And Instructions

    • Each time pressing Up button, the numeral is incremented by 1. • The negative sign (-) must be set to the leftmost digit. For example, set ‘-04.00’ instead of ‘-4.00’ . * Fifth digit ・・・・・ MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 24 Press Alarm/↓ or Scale/↑ button to apply the new setting. • The next or previous parameter setting is indicated. *1 Display depands on the speci cations and settings. MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 25: Instructions On Basic Operation

    • If you get lost in a setting mode, you can execute initialization. (Refer to 13.2 INITIALIZING SETTING VALUES.) ■ ORDER TO DISPLAY PARAMETERS • Refer to 5. PARAMETER CONFIGURATION for details. MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 26: Setting Scaling Values

    The display value increases The display value decreases when the input signal increases. when the input signal increases. Display Display Display Scaling Display Scaling Input Input Input Scaling Input Scaling MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 27 Following pages describe operating procedures in each step to set the input scaling to 4 – 20 mA DC, and the display scal- ing to 0.00 – 10.00 m as an example. MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 28: Step 1. Input Scaling Value A

    • Each time pressing Shift button, the blinking digit moves to the right. ■ SETTING A NUMERICAL VALUE * Fifth digit ・・・・・ • Each time pressing Up button, the numeral is incremented by 1. MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 29: Operating Procedure

    Press Shift button to shift the display into the setting standby mode. Blinking • The fifth digit starts blinking, to which you can apply changes. • ‘Tch’ indicator turns off. MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 30 Measuring Mode without applying the last changes. • If you get lost in a setting mode, you can execute initialization. (Refer to 13.2 INITIALIZING SETTING VALUES.) MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 31: Step 2. Display Scaling Value A

    • Each time pressing Shift button, the blinking digit moves to the right. ■ SETTING A NUMERICAL VALUE * Fifth digit ・・・・・ • Each time pressing Up button, the numeral is incremented by 1. MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 32: Operating Procedure

    A setting. • The display scaling value A is indicated. • ‘Zro’ and ‘D/P’ indicators turn on. NOTE Skip to Step 7 if the default value is acceptable. MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 33 Measuring Mode without applying the last changes. • If you get lost in a setting mode, you can execute initialization. (Refer to 13.2 INITIALIZING SETTING VALUES.) MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 34: Step 3. Input Scaling Value B

    B setting. • The input scaling value B is indicated. • ‘Spn’ and ‘Tch’ indicators turn on. NOTE Skip to Step 7 if the default value is acceptable. MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 35 Measuring Mode without applying the last changes. • If you get lost in a setting mode, you can execute initialization. (Refer to 13.2 INITIALIZING SETTING VALUES.) MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 36: Step 4. Display Scaling Value B

    B setting. • The display scaling value B is indicated. • ‘Spn’ and ‘D/P’ indicators turn on. NOTE Skip to Step 7 if the default value is acceptable. MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 37 Measuring Mode without applying the last changes. • If you get lost in a setting mode, you can execute initialization. (Refer to 13.2 INITIALIZING SETTING VALUES.) MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 38: Step 5. Decimal Point Position

    • “No decimal point” to “4 decimal places” can be selected in the decimal point position setting. SETTING VALUE FUNCTION SETTING VALUE FUNCTION No decimal point 3 decimal places (10 1 decimal place (10 4 decimal places (10 2 decimal places (10 MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 39: Operating Procedure

    Press Alarm/↓ or Scale/↑ button to go to the decimal point position setting. • The decimal point position is indicated. • ‘D/P’ indicator turns on. NOTE Skip to Step 7 if the default value is acceptable. MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 40 Measuring Mode without applying the last changes. • If you get lost in a setting mode, you can execute initialization. (Refer to 13.2 INITIALIZING SETTING VALUES.) MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 41: Operation

    Apply 20 mA input (100%) and make sure that 10.00 m is indi- cated. NOTE When the indication is shifted with the function indicators off, perform Teach Calibration. (Refer to 11.1 TEACH CALIBRA- TION.) MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 42: Parameter Configuration

    ■ TRANSITION FROM EACH MODE TO MEASURING MODE Hold down Alarm/↓ or Scale/↑ button for 1 second or more to return to Measuring Mode. MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 43 • The display depends on the settings. The above displays show default values. • Hold down Alarm/↓ or Scale/↑ button for 1 second or more to return to Measuring Mode from each parameter. MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6...
  • Page 44 • The display depends on the settings. The above displays show default values. • Hold down Alarm/↓ or Scale/↑ button for 1 second or more to return to Measuring Mode from each parameter. MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6...

  • Page 45: Averaging Input

    No. reaches the set value, all samples are averaged every 25 milliseconds. (2) After the sampling No. reaches the set value, a new sample is added to be averaged with the oldest one omitted. Such operation is repeated. MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 46: Operating Procedure

    • Press Scale/↑ button, and the version indication will be indicated. Hold down Alarm/↓ or Scale/↑ button for 1 second or more to return to Measuring Mode. MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 47: Eliminating Fluctuation Around "0

    Set the display scaling value A to 0 when the low-end cutout is set to ON. Otherwise with the display scaling ±1000 and the low-end cutout value 50, for example, the indication with the scaling value -1000 to 49 will be cut to 0. MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6...

  • Page 48: Low-End Cutout

    Press Alarm/↓ or Scale/↑ button to go to the low-end cutout setting. • ‘ZOFF’ is indicated. • ‘Fnc’ indicator turns on. Press Shift or Up button to select ‘Z ON’. Blinking MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 49 Skip to Step 2 in “7.2 LOW-END CUTOUT VALUE” . ■ TO QUIT, Hold down Alarm/↓ or Scale/↑ button for 1 second or more to return to Measuring Mode. MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 50: Low-End Cutout Value

    The low-end cutout value is indicated within the range of ‘Z 00’ to ‘Z 99’ depending on the setting. Press Shift button to shift the display into the setting standby mode. Blinking • The second digit starts blinking, to which you can apply changes. MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 51 • Press Scale/↑ button, and the low-end cutout ‘Z ON’ will be indicated. Hold down Alarm/↓ or Scale/↑ button for 1 second or more to return to Measuring Mode. MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 52: Adjusting Brightness Of Display

    Brightness level 1 (dark) Brightness level 2 Brightness level 3 Brightness level 4 Brightness level 5 (bright) ■ ADJUSTMENT IMAGE Increasing brightness Decreasing brightness Increasing brightness Decreasing brightness MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 53: Operating Procedure

    Press Shift or Up button to select. Blinking • Select one among ‘C 1’ , ‘C 2’ , ‘C 3’ , ‘C 4’ and ‘C 5’ . MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 54 The low-end cutout ‘ZOFF’ will be indicated with the cutout set to OFF. Hold down Alarm/↓ or Scale/↑ button for 1 second or more to return to Measuring Mode. MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 55: Going Back Automatically To Measuring Mode

    SETTING TIME OUT Measuring Mode Displaying MAX or MIN value Disabled Executing Forced Zero Disabled Scaling Setting Mode Enabled Advanced Setting Mode Enabled Lockout Setting Mode Enabled MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 56: Operating Procedure

    • The second digit starts blinking, to which you can apply changes. Press Shift and Up buttons to set the automatic return time to Measuring Mode. • Set within the range of ‘R 00’ to ‘R 99’ . MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 57 • Press Scale/↑ button, and the brightness ‘C 1’ , ‘C 2’ , ‘C 3’ , ‘C 4’ or ‘C 5’ will be indicated depending on the setting. Hold down Alarm/↓ or Scale/↑ button for 1 second or more to return to Measuring Mode. MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6...

  • Page 58: Useful Functions

    • Forced Zero cannot be executed or canceled while ‘S.ERR’ is indicated. Increase or decrease the input signal within the measurable range and then execute the Forced Zero again. MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 59: Retaining Max And Min Values

    (3) The internal memory is reset for approx. 3 seconds after the power is off and on again, and then the unit starts to meas- ure MAX and MIN values again. MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 60 • MAX and MIN values are not indicated while ‘S.ERR’ is indicated. Increase or decrease the input signal within the measurable range and then press Max/Min button again. MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 61: Limiting Button Operation

    ‘SOFF’ or ‘S ON’ is indicated depending on the setting. Press Alarm/↓ or Scale/↑ button to go to the advanced setting lockout setting. • ‘DOFF’ is indicated. • ‘D/P’ and ‘Fnc’ indicators turn on. MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 62 • Press Scale/↑ button, and the scaling setting lockout ‘SOFF’ or ‘S ON’ will be indicated depending on the setting. Hold down Alarm/↓ or Scale/↑ button for 1 second or more to return to Measuring Mode. MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6...

  • Page 63: Transition Time To Lockout Setting Mode

    The transition time is indicated within the range of ‘P 00’ to ‘P 99’ depending on the setting. Press Shift button to shift the display into the setting standby mode. Blinking • The second digit starts blinking, to which you can apply changes. MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 64 • Press Scale/↑ button, and the automatic return time to Measuring Mode will be indicated within the range of ‘R 00’ to ‘R 99’ depending on the setting. Hold down Alarm/↓ or Scale/↑ button for 1 second or more to return to Measuring Mode. MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 65: User Calibration

    • In setting the input scaling values using actual inputs, carry out the Teach Calibration within the setting range per input code. Do not set ‘input scaling value A ≥ input scaling value B’ in carrying out the Teach Calibration. MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6...

  • Page 66: Operating Procedure

    Apply 0% input and press Up button to register the value. • The teach calibration (ZERO) is registered. • ‘Tch’ indicator turns ON. IMPORTANT Confirm that the input signal is stable before pressing Up button. MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 67 Confirm that the input signal is stable before pressing Up button. Hold down Alarm/↓ or Scale/↑ button for 1 second or more to return to Measuring Mode. MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 68: Inspection / Cleaning

    • Check the terminal block screws periodically. In checking the screws, for safety, interrupt electricity to the power and input. • Make sure periodically that the mounting brackets are fixed tightly. Loosened brackets may cause drop of the unit. MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 69: Troubleshooting

    Lockout Setting Mode. • The scaling setting lockout is indicated. • ‘D/P’ and ‘Fnc’ indicators turn on. NOTE ‘SOFF’ or ‘S ON’ is indicated depending on the setting. MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 70 • Press Scale/↑ button, and the forced zero lockout ‘ZOFF’ will be indicated. Hold down Alarm/↓ or Scale/↑ button for 1 second or more to return to Measuring Mode. MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 71: Confirming Firmware Version

    • ‘Fnc’ indicator turns on. NOTE The displays depend on the firmware version number. Hold down Alarm/↓ or Scale/↑ button for 1 second or more to return to Measuring Mode. MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 72: Appendices

    Approx. 10 Ω Voltage Input code: 5 1 MΩ minimum Input code: 6 1 MΩ minimum Input code: 4W 1 MΩ minimum Input code: 5W 1 MΩ minimum MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 73 EN 61010-1 Installation Category II Pollution Degree 2 Input to power: Reinforced insulation (300 V) RoHS Directive Protection against access to the terminal blocks Finger protection (VDE 0660-514) MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 74: Model Numbering

    /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating TERMINAL SCREW MATERIAL /S01: Stainless steel EX-FACTORY SETTING /SET: Preset according to the Ordering Information Sheet (No. ESU-9514) MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 75: Parameter List

    = Blinking NOTE 2: A, D, 5, 6, 4W and 5W in the columns of SETTING RANGE and DEFAULT VALUE in Scaling Setting Mode show input codes. MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...
  • Page 76 Advanced setting OFF, ON ---- ---- lockout Forced zero lockout OFF, ON ---- ---- Initialization OFF, initialization ---- ---- NOTE 1: INDICATOR: = ON, = Blinking MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 77: Parameter Map

    • The display depends on the specifications, settings and input. • Forced zero cannot be executed or canceled when the operation is disabled with the forced zero lockout setting. MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 78: Scaling Setting Mode

    Input scaling value B Teach calibration (SPAN) No decimal point, -10.000 – 10.000 to 10 (depending on input codes) NOTE The display depends on the specifications, settings and input. MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 79: Advanced Setting Mode

    • The display depends on the specifications, settings and input. • With the low-end cutout set to OFF, the low-end cutout value setting is locked. • Version indication is for indication only, not for setting. MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 80: Lockout Setting Mode

    Scaling setting lockout OFF, ON Forced zero lockout Advanced setting lockout OFF, ON OFF, ON Initialization OFF, REST NOTE The display depends on the specifications, settings and input. MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

  • Page 81: Character Set

    14.5 CHARACTER SET ■ NUMERALS AND NEGATIVE SIGN *1 Indication when the fifth digit is ‘-1’ . ■ ALPHABET MG CO., LTD. www.mgco.jp 47LYV EM-9514-B Rev.6 5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN...

This manual is also suitable for:

47lyv

Table of Contents