1. Manuals
  2. Brands
  3. Avtech Manuals
  4. Lighting Equipment
  5. BATBAR810LIP
  6. User manual

Avtech BATBAR810LIP User Manual

8x10w rgbw battery bar led
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
BATBAR810LIP
8x10W RGBW Battery Bar LED
USER MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BATBAR810LIP and is the answer not in the manual?

Questions and answers

Related Manuals for Avtech BATBAR810LIP

Summary of Contents for Avtech BATBAR810LIP

  • Page 1 BATBAR810LIP 8x10W RGBW Battery Bar LED USER MANUAL...

  • Page 2: Safety And Handling

    Introduction Packaging:Thanks for your purchasing the BATBAR810LIP. All the lights have been checked and are in excellent operating condition. Please check the shipping carton first,because there may be damage occurred during the shipment.Then check the lights carefully and be sure that the lights is intact and works normally.In the event damage has been found, spare parts are missing or the lights works abnormally,please contact us for further instructions.
  • Page 3 •Do not directly look into the light. •It can cause harm to your eyes. •Do not look at the LEDs with a magnifying glass or any other optical instrument that may concentrate the light output. •The exterior surfaces of the light can become hot, up to 70°C during normal operation.

  • Page 4: Troubleshooting

    Troubleshooting The fixture does not turn on. The battery may be empty. Connect it to the power cable and try again. The fixture turns on and the display is on, but the LEDs do not emit light. The fixture could be set to BLACKOUT mode, set to is DMX Hold and doesn’t receive a valid signal.

  • Page 5: Mechanical Specification

    Mechanical Specification Menu Switch MENU ENTER Enter Down...

  • Page 6: Package Contents

    Package Contents ● 1 x Power cable User manual ● 1 x Power adapter ● 1 x User manual ● 1 x Fast lock...
  • Page 7 Displayer Introduction ⑦ 1. When you enter DMX Mode,it will be showed DMX,when you enter SLAVE Mode,it will be showed SLAVE. 2. This shows the condition of signal transmission. Green is connected.Red is disconnected. 3. This shows the temperature of the lights. 4.
  • Page 8 While DMX shows green but Wireless signal shows red,it means DMX Mode is connected and Wireless is disconnected. While DMX and Wireless are show red,it means DMX Mode and Wireless are disconnected. While the letters and number shows change from white to yellow,it means the temperature beyond max temperature of default settings.
  • Page 9 DMX-In this menu,you can connect several pieces of lights with DMX cable and control them with control console. 1. Press “ENTER” button and then UP or DOWN button until “DMX ” is showed. 2. Press “ENTER” button, and “CHANNEL” or “ADDRESS” will be showed.Then press ENTER. 1) “Channel [xx]”...
  • Page 10 AUTO-In this menu, you can select your desire AUTO mode and adjust the running speed. 1. Press “ENTER” button and then UP or DOWN button until “AUTO” is showed. 2. Press “ENTER” button, and “SPEED” or “AUTO MODE” will be showed. Then press ENTER,and you can see two items as below: 1) SPEED - You can select your desired speed in this menu.
  • Page 11 Features OPTICS ● Light Source: 8*10W, 4 in 1 RGBW LEDs ● Lens: standard 20°,optional 30°，45° ● Slide filter:15°,25°,45°,60*10° ● DMX Channel:3, 8, 12, 32 & 37 CH ELECTRICAL ● Power consumption: 65W ● Voltage: AC 110 - 240V, 50/60Hz ●...

  • Page 12: Programme Menu

    Programme Menu ADDRESS DMX ADDRESS ADDRESS CHANNEL CHANNEL CHANNEL CHANNELS MODE CHANNEL CHANNEL Standard, Stage Dimmer Curve TV, Architec, Theatre DMX Hold DMX State Black out Slave SLAVE Mode AUTO AUTO MODE Speed Green Blue MANUAL White Color Strobe 2700K 3200K 3500K 4000K...
  • Page 13 Remote Dimmer speed 1 Dimmer speed 2 Dimmer speed Dimmer speed 3 Dimmer speed 4 Dimmer speed 5 Key lock SET UP Display Max Temp 30-65°℃ Dimmer All Battery boost Bat usage Bat usage Green Blue White Transmitter Receiver Wireless DMX Release Release? Software Ver 1.1.0...

  • Page 14: Dmx Control Mode

    DMX control mode DMX 3 channel channel value function 0 - 255 0 - 255 Saturation 0 - 255 Value DMX 8 channel channel value function 0 - 255 Dimmer 0 - 255 Dimmer Curve1-4 0 - 255 Dimmer speed 1-5 0 - 255 0 - 255 Green...
  • Page 15 DMX 32 channel channel value function 0 - 255 Led1 Red 0 - 255 Led1 Green Led1 Blue 0 - 255 0 - 255 Led1 White 0 - 255 Led2 Red 0 - 255 Led2 Green 0 - 255 Led2 Blue 0 - 255 Led2 White 0 - 255...
  • Page 16 The installaiton should be checked by a skilled person once a year. The BATBAR810LIP is fully operational in three different mounting positions, hanging upside-down from a ceiling, set on a flat level surface or mount the unit on its side.

  • Page 17: Cable Connectors

    CABLE CONNECTORS Cabling must have a male XLR connector on one end and a female XLR connector on the other end. DMX connector configuration GROUND caution:Do not allow contact between the ground and the fixture’s chassis ground. Grounding the ground can cause a ground loop, and your fixture may perform erratically. Test cables with an ohm meter to verify positive pole and to make sure the pins are not grounded or shorted to the shield or each other.

  • Page 18: Wireless Connection

    Wireless connection DMX address: 001 ID address: 01 POWER DMX OUT DMX IN POWER Press “ENTER” button and then “UP” or “DOWN” button until “SET UP” is showed. Press “ENTER” button and then “UP” or “DOWN” button until “Wirless rel” is displayed, press ENTER button.
  • Page 19 IR Controller Power on/off button SLAVE DMX button,to control DMX AUTO AUTO SPEED address when press this SOUND SOUND button.It is channel mode when double click. STROBE DOWN Master-slave mode button. SLAVE Automatic mode button AUTO AUTO Speed adjustive button SPEED Without function SOUND...

Table of Contents