Page 1
TEMPERATURE COOL COOL FAN ONLY SPEED POWER Wait 3 Minutes Before Restarting HW-05C03/R1 001056...
Page 2
8-12 9-10 Installing unit into a window 11-12 Wall installations 13-14...
Page 6
2-way airflow TEMPERATURE COOL COOL FAN ONLY SPEED POWER Wait 3 Minutes Before Restarting easy access filters control panel MODEL: HW-05C03/R1 5. How The Unit Drains 2. MODE Set Switch...
Page 7
TEMPERATURE COOL COOL Fig. # 1 FAN ONLY SPEED POWER...
Page 8
CAUTION: Also when you shut off the air conditioner wait for 3 minutes before turning it on again.
Page 10
TEMPERATURE COOL COOL FAN ONLY SPEED POWER Wait 3 Minutes Before Restarting HW-05C03/R1 471.5...
Page 11
3. Install a second wood strip (approximately 150mm long by 38mm STORM wide and same thickness as first strip) in the center of the outer sill flush WINDOW FRAME against the back off the inner sill. This will raise basepan angle .
Page 13
Also the side louvers should not be blocked. This is to have proper air circulation in and around the compressor. (See fig.#2)
Page 14
3. Clean the filter with warm, soapy water below 40 4. Rinse and gently shake the water from the filter and let it dry before replacing DO NOT use your air conditioner without the air filter in place.
Need help?
Do you have a question about the HW-05C03 and is the answer not in the manual?
Questions and answers