Download Print this page

Haier HSU-07HV03 Operating Manual: Timer On-off Operation

Wall mounted type.
Hide thumbs

Advertisement

Operation

Timer On-Off Operation

Remote Controller
TEMP
HEALTH
FAN
SWING
MODE
H.AIR.
SLEEP
FRESH
CLOCK
SET
TIMER
LOCK
LIGHT
CODE
RESET
Set clock correctly before starting TIMER operation.
1. After unit starts, select your desired operation mode
Operation mode will be displayed on LCD.
2. Timer mode selection
Press TIMER button to change TIMER mode. Every time
the button is pressed, display changes as follows:
Remote controller:
TIMER ON
Then select your desired TIMER mode (TIMER ON - OFF).
"
"will flash.
3.Time setting
Press HOUR
Every time the button is pressed, time setting increases
1 min, if kept depressed, it will increase rapidly.
Every time the button is pressed, time setting decreases
1 min, if kept depressed, it will decrease rapidly.
It can be adjusted within 24 hours.
4.Timer confirming for TIMER ON
After setting correct time, press TIMER button to confirm
"
" on the remote controller stops flashing.
"
" starts flashing.
Time displayed: Unit starts or stops at x hour x min.
5.Time setting for TIMER OFF
Just press HOUR button ,follow the same procedure in
"Time setting for TIMER ON"
6.Time confirming for TIMER OFF
After time setting,press SET button to confirm.
"
" on the remote controller stops blinking.
Time displayed:Unit stops at x hour x min.
To cancel TIMER mode
Just press TIMER button several times until TIMER
mode disappears.
According to the Time setting sequence of TIMER ON
or TIMER OFF, either Start-Stop or Stop-Start can be
achieved.
18
BLANK
TIMER OFF
TIMER ON-OFF
button.

Advertisement

Comments to this Manuals

Symbols: 0
Latest comments:
  • lisa Feb 02, 2017 05:37:
    Im confused as to when it says 23 or 24 or any other temp on the remote it always says on the air con that it's 27 and somehow it doesn't seem to come down in temperatur​e. Why is that