1. Parts and components 2. Before use 3. Installation 4. Operation 5. Cleaning and maintenance 6. Troubleshooting 7. Technical specifications 8. Disposal of old electrical appliances 9. Technical support and warranty 10. Copyright 11. Declaration of conformity CONGA 2499 ULTRA X-TREME | 3...
Brug ikke apparatet, hvis ledningen, stikkontakten eller strukturen er beskadiget, ikke fungerer korrekt eller er faldet ned, og kontakt den officielle Cecotec tekniske supportservice med det samme. - Hvis netledningen er beskadiget, skal den udskiftes med en speciel ledning eller et sæt, der skal leveres af den officielle...
Page 9
- Dette produkt skal bruges i overensstemmelse med denne brugsanvisning. Cecotec kan ikke holdes ansvarlig eller ansvarlig for skader eller skader forårsaget af forkert brug. - Sørg for, at netspændingen svarer til den spænding, der er angivet på...
Page 10
- I tilfælde af batteriindtagelse skal du straks søge lægehjælp. - Gem den originale brugsanvisning til fremtidig reference. - Brug kun batteriet til det tilsigtede formål. - ADVARSEL: For at genoplade batteriet, brug kun den strømforsyning, der følger med enheden, med reference BZ015-190060-AG. 10 | CONGA 2499 ULTRA X-TREME...
2. FØR BRUG - Denne robotstøvsuger inkluderer en pakke designet til at beskytte den under transport. Tag robotstøvsugeren ud af æsken. Opbevar den originale æske og andre elementer på et sikkert sted, da dette vil hjælpe CONGA 2499 ULTRA X-TREME | 11...
3. Installer begge sidebørster i deres tilsvarende åbninger, placeret på den nederste del af robotstøvsugeren. Tryk indtil de klikker godt på plads. Fig. 5 4. Placer robotstøvsugeren opladningsbasen, sørg for, 12 | CONGA 2499 ULTRA X-TREME...
Slukke Hold Start/Pause-knappen på robotstøvsugeren nede for at slukke den. Advarsel Hvis du ikke skal bruge robotstøvsugeren i længere tid, er det tilrådeligt at lade den være slukket indtil ny brug. CONGA 2499 ULTRA X-TREME | 13...
Page 14
Når du vælger denne tilstand, vil robotstøvsugeren intensivt rense et bestemt sted ved maksimal effekt. Den begynder at rense på et bestemt sted og vil bevæge sig udad i en spiralbevægelse (1 meter). Derefter vender 14 | CONGA 2499 ULTRA X-TREME...
Det er praktisk at udføre denne vedligeholdelse en gang om ugen. - Det anbefales at udskifte det højeffektive filter med et nyt uden at overskride 160 rengøringstimer. CONGA 2499 ULTRA X-TREME | 15...
Page 16
2. Fjern hår, fnug og andet snavs fanget i børsten og omkring skafterne ved hjælp af den selvrensende børste. 3. Ryd og rengør robotstøvsugerens sugekanal. 4. Geninstaller hovedbørsten og dens ramme. Anbefaling Det anbefales at rengøre hovedbørsten en gang om ugen ved hjælp af den selvrensende børste. 16 | CONGA 2499 ULTRA X-TREME...
Page 17
2. Indsæt det nye batteri med batterimærkaten opad. 3. Sæt batteriet og batteridækslet på plads igen, og skru skruerne fast igen. Opladningsbase. Fig. 12: Brug en ren, tør, blød klud til at tørre støv af basens ladeterminaler. CONGA 2499 ULTRA X-TREME | 17...
Fjern genstandene 1 meter til venstre og højre og 2 meter ikke tilbage til ladestationen. foran ladestationen. Robotstøvsugeren vender hurtigere tilbage til ladestationen, når den er i nærheden af den. Når det er langt, vil det tage længere tid at identificere det. Rengør ladeterminalerne. 18 | CONGA 2499 ULTRA X-TREME...
Genstart robotstøvsugeren. For at gøre dette skal du slukke usædvanlige. og tænde for robotten eller udføre en RESET. 7. TEKNISKE SPECIFIKATIONER Conga 2499 Ultra X-Treme Produktreference: 08146 Spænding: 100-240 V AC 50/60 Hz Batteri: 14,4 V DC Li-ion 2600mAh Frekvensbånd: 2,4 GHz Maksimal transmissionseffekt: 17,5 dBm Tekniske specifikationer kan ændres uden forudgående varsel for at...
CECOTEC INNOVACIONES, S.L. 11. OVERENSSTEMMELSESERKLÆRING Cecotec Innovaciones erklærer hermed, at denne robotstøvsuger, model 08146 Conga 2499 Ultra X-Treme , er i overensstemmelse med radioudstyrsdirektivet 2014/53/EU. Den fulde tekst af EU-overensstemmelseserklæringen kan findes på følgende websted: www.cecotec.es...
- If the power cord is damaged, it must be replaced with a special cord or set to be supplied by the official Cecotec Technical Sup- port Service. - The appliance must be powered at a low safety voltage as stat- ed on the product marking.
Page 23
- This product must be used in accordance with this instruction manual. Cecotec cannot be held liable or responsible for any damages or injuries caused by improper use. - Make sure that the mains voltage matches the voltage stated on the product marking and that the wall outlet is grounded.
Page 24
- Keep the original instruction manual for future reference. - Use the battery only for its intended purpose. - WARNING: to recharge the battery, use only the power supply included with the device, with reference BZ015-190060-AG. 24 | CONGA 2499 ULTRA X-TREME...
- This robot vacuum cleaner includes a package designed to protect it during transport. Take the robot vacuum cleaner out of the box. Keep the original box and other elements in a safe place, as this will help you CONGA 2499 ULTRA X-TREME | 25...
Press until they click well into place. Fig. 5 4. Place the robot vacuum cleaner in the charging base and make sure the charging terminals on the robot match those of the base. Once the 26 | CONGA 2499 ULTRA X-TREME...
Hold down the Start/Pause button on the robot vacuum cleaner to turn it off. Warning If you are not going to use the robot vacuum cleaner for an extended period of time, it is advisable to leave it switched off until new use. CONGA 2499 ULTRA X-TREME | 27...
Page 28
Do not leave the robot vacuum cleaner charging with the mop assembled. Spiral mode When you select this mode, the robot vacuum cleaner will intensively clean a specific spot at maximum power. It will start cleaning at a specific spot 28 | CONGA 2499 ULTRA X-TREME...
It is convenient to carry out this maintenance once a week. - It is recommended to replace the high-efficiency filter with a new one without exceeding 160 cleaning hours. CONGA 2499 ULTRA X-TREME | 29...
Page 30
3. Clear and clean the robot vacuum cleaner’s suction channel. 4. Reinstall the main brush and its frame. Recommendation It is recommended to clean the main brush once a week with the help of the self-cleaning brush. 30 | CONGA 2499 ULTRA X-TREME...
Page 31
3. Put the battery and the battery cover in back in place and properly fix the screws back again. Charging base. Fig. 12: Use a clean, dry, soft cloth to wipe dust off the charging terminals of the base. CONGA 2499 ULTRA X-TREME | 31...
Check if the charging base indicators are on. Otherwise, does not charge. contact the official Technical Support Service of Cecotec. Clean the charging terminals with a clean, dry cloth. Check if the robot vacuum cleaner beeps when it gets to the charging base.
Compliance with the above guidelines will help protecting the environment. 8. TECHNICAL SUPPORT AND WARRANTY Cecotec shall be liable to the end user or consumer for any lack of conformity that exists at the time of delivery of the product under the terms, conditions, and deadlines established by the applicable regulations.
9. COPYRIGHT The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The contents of this publication may not, in whole or in part, be reproduced, stored in a retrieval system, transmitted, or distributed by any means (electronic, mechanical, photocopying, recording or similar) without the prior authorization of CECOTEC INNOVACIONES, S.L.
Need help?
Do you have a question about the CONGA 2499 ULTRA X-TREME and is the answer not in the manual?
Questions and answers