Haier AC092ACBHA Manuel D'utilisation page 17

Installation of Indoor Unit
(Fig. 4)
Wall
10cm
Indoor unit outdoor unit
For series 14,18,24 when installing set to wall, install
the accessory wall bracket at the position shown in
Fig.5,and mount the set to it.
2. INSTALLING DRAIN HOSE
Select whether the drain hose will be connected to the left or right side.(for series 28,36,42 only the right side).(Fig.3)
Insert the drain hose into the drain pan, then secure the drain hose with a nylon fastener. (Fig.6)
(Fig. 6)
Drain pan
Drain hose
Wrap the insulation (drain hose) around the drain hose connection.(Fig.7)
Be sure to arrange the drain hose correctly so that it is leveled lower than the drain hose connecting port of the indoor
unit.
(Fig. 8)
Arrange the drain hose
lower than this portion.
Do not install the unit drain hose side is too high. Height A should be less than 5 mm.(Fig.9)
(Fig. 9)
6mm
Nylon fastener
OK
Drain hose
CAUTION
A
(Fig. 5)
99cm
50cm
6.5cm
3.5cm hole
12.5cm
(Fig. 7)
Drain hose
NO NO
Drain hose
A
15
24.5cm
Wall bracket
Side of set
7cm hole
10cm
Drain pan
Insulation
(Drain hose)