Icom IC-705 Installation Manual page 2

Assembly Instructions
Please read and review all of the instructions before starting the assembly of your frame.
1. Assemble the side rails onto the frame, using 4 M4 x 10mm socket head screws. The inside
edge of the side rails should line up with the inside edge of the frame. Tighten these screws
securely.
2. Attach the handle brackets to the top of the frame using the two M4 x 12mm button head
screws. If you look at the L-shaped brackets closely you will notice that one leg of the L is
thicker than the other. The thick leg should be vertical. Note that one side of the bracket is
smoother than the other – the smooth side should face the operator. Line the brackets up with
the frame and tighten the screws securely.