Command Line Arguments; Command Line Examples - HP BladeSystem Dual NC370i - Multifunction Network Adapter User Manual

Only one of the following configuration options can be specified at a time:
/S
/D
/C
/P
The /L argument can be used with any of the configuration options. The /F argument can only be used
with the /C configuration option.

Command line arguments

Argument
/S
/D
/C
/P
/L
/F
/?

Command line examples

/S
cqniccmd /Sc:\HP\teamcfg.xml
cqniccmd /S c:\HP\teamcfg.xml
cqniccmd /S"c:\HP\teamcfg.xml"
/D
cqniccmd /D
/C
cqniccmd /Cc:\HP\teamcfg.xml
cqniccmd /C c:\HP\teamcfg.xml
cqniccmd /C"c:\HP\teamcfg.xml"
/P
cqniccmd /Pc:\HP\teamcfg.xml
cqniccmd /P c:\HP\teamcfg.xml
cqniccmd /P"c:\HP\teamcfg.xml"
Description
This configuration option causes the source server configuration to be saved. The name of
the XML configuration data file must be specified and the path to the data file must exist.
This option is identical to saving the source server configuration by clicking Save in the
Network Teaming Configuration user interface.
This configuration option causes all teams on the target server to be dissolved, all VLANs
to be removed, and 802.1p/q Packet Tagging to be disabled for all adapters that had
no VLANs. No additional arguments are required or allowed with this option.
This configuration option applies the configuration specified in the data file to the target
system. An existing XML configuration data file must be specified following the target
switch. A space following the switch is optional. Any teams that exist on the target server
will be dissolved before the configuration is applied, all VLANs will be removed, and
802.1p/q Packet Tagging will be disabled.
This option is identical to the /C option, except that the configuration options are not
applied to the target system. This is useful for syntax checking the XML data file.
This option can be used to change the name and location of the cpqteam.log default log
file that is created in \cpqsystem\log on the system drive. The supplied path must exist.
An invalid log file name will cause the configuration to terminate with no changes. HP
recommends this option only in batch files.
This option causes all errors, including those errors normally treated as non-fatal errors, to
be treated as fatal errors. This argument can be used only with the /C option.
This option displays usage information.
Scripting 9