PCB Piezotronics IMI SENSORS EX621C40 Assembly Instructions Manual page 31

I ECEx Certificate
of Conformity
Certificate No ECEx ETL 18.0009X
Issue No: 0
Date of Issue
2018-06-29
Page 2 of 3
Manufacturer
PCB Piezotronics, Incorporated
3425 Walden Avenue, Depew, New York 14043-2495
United States of America
Additional Manufacturing location(s):
This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the
lEO Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and
found to comply with the lECEx Quality system requirements. This certificate is granted subject to the conditions as set out in lECEx Scheme
Rules, lECEx 02 and Operational Documents as amended.
STANDARDS:
The apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply
with the following standards:
IEC 60079-0: 2011 Explosive atmospheres
-
Part 0: General requirements
Edition:6.0
IEC 60079-11 :2011 Explosive atmospheres
-
Part 11: Equipment protection by intrinsic safety "i'
Edition:6.0
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the
Standards listed above.
TEST & ASSESSMENT REPORTS:
A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in
Test Report:
US/ETLJExTR18.001 3/00
Quality Assessment Report:
NUDEK/QAR14.0004/02