PCB Piezotronics IMI SENSORS EX621C40 Assembly Instructions Manual page 26

Manufacturer: PCB Piezotronics, Inc.
3425 Walden Avenue
Depew, New York 14043 USA
Certifies that type of equipment:
Whose Product Models Include:
This declaration is applicable to all Vibration Sensor(s) of the above series which have the CE & (EX) ATEX mark
on their data sheets and where those data sheets refer to this declaration of conformity. The data sheets for all
model numbers referenced above, which include the CE & (EX) ATEX mark on such data sheets and refer to this
Declaration of Conformity are hereby incorporated by reference into this Declaration.
Conform to the following EU
Directive(s) when installed per
product documentation:
Harmonized EN 61326-1:2013
Standards
EN 61326-2-3:2013
EN 60079-0:2012
+A11:2013
EN 60079-11:2012
EN 63000:2018
Emissions Test EN 55011:2009+
Standards
A1:2010
Other EN 61000-6-1:2007
Standards
Applied (non-
OJEU)
EN 61000-6-2:2005
Immunity Test
Standards
Test Reports EMC Reports
Safety Reports
EC Type ATEX Certification
Examination
PS185 REV. Q 08/21/2021
EU Declaration of Conformity PS185
In Accordance with ISO/IEC 17050
Authorized
European
Representative:
ICP® Vibration Sensor(s)
EX(M)621xyyy/aaa Series
Where:
(M) - Represents optional Metric mounting hardware and cable
x – Represents one Letter A to Z
yyy – Represents two or three Numbers 00 to 999
aaa - Designates cable length and/or connector type
2014/30/EU
2014/34/EU
2011/65/EU w/2015/863/EU
Standards to which Conformity is Declared:
Electrical Equipment for Measurement, Control and Laboratory
Use- EMC Requirements – Part 1: General Requirements
Electrical Equipment for Measurement, Control and Laboratory
Use- EMC Requirements – Part 2-3: Particular Requirements
Explosive Atmospheres – Part 0: Equipment – General
Requirements
Explosive Atmospheres – Part 11: Equipment Protection by
Intrinsic Safety "i"
Technical documentation for the assessment of electrical and
electronic products with respect to the restriction of hazardous
substances
Industrial, Scientific and Medical Equipment - Radio frequency
Disturbance Characteristics - Limits and Methods of
Measurement
Electromagnetic Compatibility (EMC) - Generic standards —
Immunity for residential, commercial and light-industrial
environments
Electromagnetic compatibility (EMC) — Part 6-2: Generic
standards — Immunity for industrial environments
Explosive Atmospheres
GM29028c, GM29030c, GM29045c
GM29029s, GM29031s, GM29046s
ITS 18 ATEX 23198X
Ex ia IIC T4 Ga, II 1 G
PCB Piezotronics Europe GmbH
Porschestrasse 20-30
41836 Hückelhoven, Germany
EMC Directive
ATEX Directive
RoHS Directive