Advertisement

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the B760M PRO RS/D4 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for ASROCK B760M PRO RS/D4

  • Page 2 Contact Information If you need to contact ASRock or want to know more about ASRock, you’re welcome to visit ASRock’s website at http://www.asrock.com; or you may contact your dealer for further information. For technical questions, please submit a support request form at https://event.asrock.com/tsd.asp...
  • Page 3: Table Of Contents

    Package Contents Specifications Motherboard Layout I/O Panel Block Diagram 802.11ax Wi-Fi 6E Module and ASRock WiFi 2.4/5/6 GHz Antennas (For B760M Pro RS/D4 WiFi) Chapter 2 Installation Installing the CPU Installing the CPU Fan and Heatsink Installing Memory Modules (DIMM)
  • Page 4 2.14 M.2 WiFi/BT PCIe WiFi Module and Intel® CNVi (Integrated WiFi/BT) Installation Guide (For B760M Pro RS/D4) 2.15 M.2 SSD Module Installation Guide (M2_1) 2.16 M.2 SSD Module Installation Guide (M2_2)
  • Page 5: Chapter 1 Introduction

    If you require technical support related to this mother- board, please visit our website for specific information about the model you are using. You may find the latest VGA cards and CPU support list on ASRock’s website as well. ASRock website http://www.asrock.com.
  • Page 6: Specifications

    • Supports ECC UDIMM memory modules (operate in non- ECC mode) • Max. capacity of system memory: 128GB • Supports Intel® Extreme Memory Profile (XMP) 2.0 * Please refer to Memory Support List on ASRock's website for more information. (http://www.asrock.com/) Expansion CPU: Slot • 1 x PCIe 4.0 x16 Slot (PCIE1), supports x16 mode*...
  • Page 7 B760M Pro RS/D4 WiFi B760M Pro RS/D4 Graphics • Intel® UHD Graphics Built-in Visuals and the VGA outputs can be supported only with processors which are GPU integrated. • Intel® X Graphics Architecture (Gen 12) • 1 x HDMI 2.1 TMDS Compatible, supports HDCP 2.3 and max.
  • Page 8 • 5 x USB 3.2 Gen1 Type-A (3 Rear, 2 Front) • 6 x USB 2.0 (2 Rear, 4 Front) * All USB ports support ESD Protection • 2 x Antenna Ports (For B760M Pro RS/D4 WiFi) Rear Panel • 2 x Antenna Mounting Points (For B760M Pro RS/D4) • 1 x PS/2 Mouse/Keyboard Port...
  • Page 9 • ErP/EuP ready (ErP/EuP ready power supply is required) * For detailed product information, please visit our website: http://www.asrock.com Please realize that there is a certain risk involved with overclocking, including adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using third-party overclocking tools.
  • Page 10: Motherboard Layout

    1.3 Motherboard Layout B760M Pro RS/D4 WiFi: CPU_FAN1 CPU_FAN2/WP ATX12V1 CHA_FAN3 USB 3.2 Gen1 T:USB32_1 B: USB32_TC1 Top: USB 3.2 Gen1 T: USB32_4 RJ-45 B: USB32_3 CHA_FAN1/WP RoHS PCIE1 WiFi-802.11ax Intel Module CMOS Battery B760 PCIE2 PCIE3 AUDIO CODEC DRAM...
  • Page 11 B760M Pro RS/D4 WiFi B760M Pro RS/D4 B760M Pro RS/D4 : CPU_FAN1 CPU_FAN2/WP ATX12V1 CHA_FAN3 USB 3.2 Gen1 T:USB32_1 B: USB32_TC1 Top: USB 3.2 Gen1 T: USB32_4 RJ-45 B: USB32_3 CHA_FAN1/WP RoHS PCIE1 Intel CMOS Battery B760 PCIE2 PCIE3 AUDIO...
  • Page 12 No. Description ATX 12V Power Connector (ATX12V1) 2 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1) 2 x 288-pin DDR4 DIMM Slots (DDR4_A2, DDR4_B2) CPU Fan Connector (CPU_FAN1) CPU/Water Pump Fan Connector (CPU_FAN2/WP) Chassis/Water Pump Fan Connector (CHA_FAN3/WP) Addressable LED Header (ADDR_LED2) Addressable LED Header (ADDR_LED3) ATX Power Connector (ATXPWR1) USB 3.2 Gen1 Header (USB32_5_6)
  • Page 13: I/O Panel

    B760M Pro RS/D4 WiFi B760M Pro RS/D4 1.4 I/O Panel B760M Pro RS/D4 WiFi: No. Description No. Description Antenna Ports USB 3.2 Gen1 Type-A Port USB 2.0 Ports (USB_12) (USB32_1) 2.5G LAN RJ-45 Port* USB 3.2 Gen1 Type-C Port Line In (Light Blue)**...
  • Page 14 B760M Pro RS/D4: No. Description No. Description USB 2.0 Ports (USB_12) USB 3.2 Gen1 Type-A Port 2.5G LAN RJ-45 Port* (USB32_1) Line In (Light Blue)** USB 3.2 Gen1 Type-C Port Front Speaker (Lime)** (USB32_TC1) Microphone (Pink)** DisplayPort 1.4 USB 3.2 Gen1 Type-A Ports...
  • Page 15 B760M Pro RS/D4 WiFi B760M Pro RS/D4 * There are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications. ACT/LINK LED SPEED LED LAN Port Activity / Link LED Speed LED...
  • Page 16: Block Diagram

    1.5 Block Diagram...
  • Page 17: 802.11Ax Wi-Fi 6E Module And Asrock Wifi 2.4/5/6 Ghz Antennas (For B760M Pro Rs/D4 Wifi)

    B760M Pro RS/D4 WiFi B760M Pro RS/D4 1.6 802.11ax Wi-Fi 6E Module and ASRock WiFi 2.4/5/6 GHz Antennas (For B760M Pro RS/D4 WiFi) 802.11ax Wi-Fi 6E + BT Module This motherboard comes with an exclusive 802.11 a/b/g/n/ac/ax Wi-Fi 6E + BT module that offers support for 802.11 a/b/g/n/ac/ax Wi-Fi 6E connectivity standards and...
  • Page 18 WiFi Antennas Installation Guide Step 1 Prepare the WiFi 2.4/5/6 GHz Antennas that come with the package. Step 2 Connect the two WiFi 2.4/5/6 GHz Antennas to the antenna connectors. Turn the antenna clockwise until it is securely connected. Step 3 Set the WiFi 2.4/5/6 GHz Antenna as shown in the illustration.
  • Page 19: Chapter 2 Installation

    B760M Pro RS/D4 WiFi B760M Pro RS/D4 Chapter 2 Installation This is a Micro ATX form factor motherboard. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. Pre-installation Precautions Take note of the following precautions before you install motherboard components or change any motherboard settings.
  • Page 20: Installing The Cpu

    2.1 Installing the CPU 1. Before you insert the 1700-Pin CPU into the socket, please check if the PnP cap is on the socket, if the CPU surface is unclean, or if there are any bent pins in the socket. Do not force to insert the CPU into the socket if above situation is found.
  • Page 21 B760M Pro RS/D4 WiFi B760M Pro RS/D4 Please save and replace the cover if the processor is removed. The cover must be placed if you wish to return the motherboard for after service.
  • Page 22: Installing The Cpu Fan And Heatsink

    2.2 Installing the CPU Fan and Heatsink...
  • Page 23: Installing Memory Modules (Dimm)

    B760M Pro RS/D4 WiFi B760M Pro RS/D4 2.3 Installing Memory Modules (DIMM) This motherboard provides four 288-pin DDR4 (Double Data Rate 4) DIMM slots, and supports Dual Channel Memory Technology. 1. For dual channel configuration, you always need to install identical (the same brand, speed, size and chip-type) DDR4 DIMM pairs.
  • Page 25: Connecting The Front Panel Header

    B760M Pro RS/D4 WiFi B760M Pro RS/D4 2.4 Connecting the Front Panel Header Front Panel Wires System Panel Header Power SW (-) RESET SW (+) Power SW (+) RESET SW (-) Power LED (-) HDD LED (-) Power LED (+)
  • Page 26: Installing The Motherboard

    2.5 Installing the Motherboard...
  • Page 27: Installing Sata Drives

    B760M Pro RS/D4 WiFi B760M Pro RS/D4 2.6 Installing SATA Drives Optical Drive SATA Drive SATA Data Cable...
  • Page 28 SATA Power Connector SATA Data Connector...
  • Page 29: Installing A Graphics Card

    B760M Pro RS/D4 WiFi B760M Pro RS/D4 2.7 Installing a Graphics Card CLICK!
  • Page 30 Expansion Slots (PCIe Slots) There are 3 PCIe slots on the motherboard. Before installing an expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation.
  • Page 31: Connecting Peripheral Devices

    B760M Pro RS/D4 WiFi B760M Pro RS/D4 2.8 Connecting Peripheral Devices...
  • Page 32: Connecting The Power Connectors

    2.9 Connecting the Power Connectors...
  • Page 33: Power On

    B760M Pro RS/D4 WiFi B760M Pro RS/D4 2.10 Power On...
  • Page 34: Jumpers Setup

    2.11 Jumpers Setup The illustration shows how jumpers are setup. When the jumper cap is placed on the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper is “Open”. Clear CMOS Jumper (CLRMOS1) (see p.6, 7, No. 25) CLRMOS1 allows you to clear the data in CMOS.
  • Page 35: Onboard Headers And Connectors

    B760M Pro RS/D4 WiFi B760M Pro RS/D4 2.12 Onboard Headers and Connectors Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage to the motherboard.
  • Page 36 Chassis Intrusion and Speaker Header (7-pin SPK_CI1) (see p.6, 7, No. 21) Please connect the chassis intrusion and the chassis speaker to this header. SPK_CI1 SPEAKER DUMMY DUMMY SIGNAL DUMMY Serial ATA3 Connectors Vertical: (SATA3_0) (see p.6, 7, No. 15) (SATA3_1) (see p.6, 7, No.
  • Page 37 B760M Pro RS/D4 WiFi B760M Pro RS/D4 USB 2.0 Headers (9-pin USB_3_4) (see p.6, 7, No. 20) (9-pin USB_5_6) (see p.6, 7, No. 19) There are two headers on this motherboard. Each USB 2.0 header can support two ports. USB_5_6...
  • Page 38 USB 3.2 Gen1 Header (19-pin USB32_5_6) (see p.6, 7, No. 10) There is one USB 3.2 Gen1 header on this motherboard. This USB 3.2 Gen1 header can support two ports. USB32_5_6 Vbus Vbus Vbus IntA_PB_SSRX- IntA_PA_SSRX- IntA_PB_SSRX+ IntA_PA_SSRX+ IntA_PB_SSTX- IntA_PA_SSTX- IntA_PB_SSTX+ IntA_PA_SSTX+ IntA_PB_D-...
  • Page 39 B760M Pro RS/D4 WiFi B760M Pro RS/D4 Front Panel Audio Header (9-pin HD_AUDIO1) (see p.6, 7, No. 28) This header is for connecting audio devices to the front audio panel. HD_AUDIO1 PRESENCE# MIC_RET OUT_RET OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L High Definition Audio supports Jack Sensing, but the panel wire on the chassis must sup- port HDA to function correctly.
  • Page 40 Chassis/Water Pump Fan Connectors (4-pin CHA_FAN1/WP) (see p.6, 7, No. 29) (4-pin CHA_FAN2/WP) (see p.6, 7, No. 22) (4-pin CHA_FAN3/WP) (see p.6, 7, No. 6) (4-pin CHA_FAN4/WP) (see p.6, 7, No. 23) This motherboard provides four 4-Pin water cooling chassis fan connectors. If you plan to connect a 3-Pin chassis water cooler fan, please connect it to Pin 1-3.
  • Page 41 B760M Pro RS/D4 WiFi B760M Pro RS/D4 CPU Fan Connector (4-pin CPU_FAN1) (see p.6, 7, No. 4) This motherboard provides a 4-Pin CPU fan (Quiet Fan) connector. If you plan to connect a 3-Pin CPU fan, please connect it to Pin 1-3.
  • Page 42 ATX Power Connector (24-pin ATXPWR1) (see p.6, 7, No. 9) This motherboard provides a 24-pin ATX power connector. To use a 20-pin ATX power supply, please plug it along Pin 1 and Pin 13. ATXPWR1 ATX 12V Power Connector (8-pin ATX12V1) (see p.6, 7, No. 1) This motherboard provides a 8-pin ATX 12V power connector.
  • Page 43 B760M Pro RS/D4 WiFi B760M Pro RS/D4 SPI TPM Header (13-pin SPI_TPM_J1) (see p.6, 7, No. 17) This connector supports SPI Trusted Platform Module (TPM) system, which can securely store keys, digital certificates, passwords, and data. A TPM system also helps enhance network security, protects digital identities, and ensures platform integrity.
  • Page 44 RGB LED Header (4-pin RGB_LED1) (see p.6, 7, No. 27) This RGB header is used to connect RGB LED extension cable which allow users to choose from various LED lighting effects. Caution: Never install the RGB LED cable in the wrong orientation; otherwise, the cable may be damaged.
  • Page 45 B760M Pro RS/D4 WiFi B760M Pro RS/D4 Addressable LED Headers (3-pin ADDR_LED1) (see p.6, 7, No. 26) (3-pin ADDR_LED2) (see p.6, 7, No. 7) (3-pin ADDR_LED3) (see p.6, 7, No. 8) These headers are used to connect Addressable LED extension cables which allow users to choose from various LED lighting effects.
  • Page 46 1. Never install the Addressable LED cable in the wrong orientation; otherwise, the cable may be damaged. 2. Before installing or removing your Addressable LED cable, please power off your system and unplug the power cord from the power supply. Failure to do so may cause damages to motherboard components.
  • Page 47: Post Status Checker

    B760M Pro RS/D4 WiFi B760M Pro RS/D4 2.13 Post Status Checker Post Status Checker (PSC) diagnoses the computer when users power on the machine. It emits a red light to indicate whether the CPU, memory, VGA or storage is dysfunctional. The lights go off if the four mentioned above are function- ing normally.
  • Page 48 2.14 M.2 WiFi/BT PCIe WiFi Module and Intel® CNVi (Integrated WiFi/BT) Installation Guide (For B760M Pro RS/D4) The M.2 is a small size and versatile card edge connector that aims to replace mPCIe and mSATA. The M.2 Socket (Key E) supports type 2230 WiFi/BT PCIe WiFi module and Intel®...
  • Page 49 B760M Pro RS/D4 WiFi B760M Pro RS/D4 Step 3 Gently insert the WiFi/BT PCIe WiFi module or Intel® CNVi (Integrated WiFi/BT) into the M.2 slot. Please be aware that the module only fits in one orientation. Step 4 Tighten the screw with a screwdriver to secure the module into place.
  • Page 50 2.15 M.2 SSD Module Installation Guide (M2_1) The M.2 is a small size and versatile card edge connector that aims to replace mPCIe and mSATA. The Hyper M.2 Socket (M2_1, Key M) supports type 2242/2260/2280 PCIe Gen4x4 (64 Gb/s) mode. Installing the M.2 SSD Module Step 1 Prepare a M.2 SSD module and the...
  • Page 51 B760M Pro RS/D4 WiFi B760M Pro RS/D4 Step 3 Before installing a M.2 SSD module, please loosen the screws to remove the M.2 heatsink. *Please remove the protective films on the bottom side of the M.2 heatsink before you install a M.2 SSD module.
  • Page 52 Step 6 Tighten the screw with a screwdriver to secure the module into place. Please do not overtighten the screw as this might damage the module. Skip Step 6 if your M.2 SSD module is NUT2 NUT1 Type 2280. Step 7 Before securing the M.2 heatsink, make sure to align the notch on the SSD to the standoff on the...
  • Page 53 B760M Pro RS/D4 WiFi B760M Pro RS/D4 Step 8 Tighten the screws with a screwdriver to secure the module (if your M.2 SSD module is Type 2280) and M.2 heatsink into place in the order shown. Tighten screw opposite the M.2 connector first (2), and then...
  • Page 54 2.16 M.2 SSD Module Installation Guide (M2_2) The M.2 is a small size and versatile card edge connector that aims to replace mPCIe and mSATA. The Hyper M.2 Socket (M2_2, Key M) supports type 2280 PCIe Gen4x4 (64 Gb/s) mode. Installing the M.2 SSD Module Step 1 Prepare a M.2 SSD module and the...
  • Page 55 B760M Pro RS/D4 WiFi B760M Pro RS/D4 Step 4 Align and gently insert the M.2 SSD module into the M.2 slot. Please be aware that the M.2 SSD module only fits in one orientation. Step 5 Tighten the screw with a screwdriver to secure the module into place.
  • Page 56 (including damages for loss of profits, loss of business, loss of data, interruption of business and the like), even if ASRock has been advised of the possibility of such damages arising from any defect or error in the documentation or product.
  • Page 57 INTEL END USER SOFTWARE LICENSE AGREEMENT IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING. LICENSE. Licensee has a license under Intel’s copyrights to reproduce Intel’s Software only in its unmodified and binary form, (with the accompanying documentation, the “Software”) for Licensee’s personal use only, and not commercial use, in connection with Intel-based products for which the Software has been provided, subject to the following conditions: (a) Licensee may not disclose, distribute or transfer any part of the Software, and You agree...
  • Page 58 U.S. GOVERNMENT RESTRICTED RIGHTS. The Software is a commercial item (as defined in 48 C.F.R. 2.101) consisting of commercial computer software and commercial computer software documentation (as those terms are used in 48 C.F.R. 12.212), consistent with 48 C.F.R. 12.212 and 48 C.F.R 227.7202-1 through 227.7202-4. You will not provide the Software to the U.S.
  • Page 59 If you require assistance please call ASRock Tel : +886-2-28965588 ext.123 (Standard International call charges apply)
  • Page 60 ASRock follows the green design concept to design and manufacture our products, and makes sure that each stage of the product life cycle of ASRock product is in line with global environmental regulations. In addition, ASRock disclose the relevant information based on regulation requirements.
  • Page 61 Operations in the 5.15-5.35GHz band are restricted to indoor usage only. Radio transmit power per transceiver type Function Frequency Maximum Output Power (EIRP) 2400-2483.5 MHz 18.5 + / -1.5 dbm 5150-5250 MHz 21.5 + / -1.5 dbm 18.5 + / -1.5 dbm (no TPC) 5250-5350 MHz 21.5 + / -1.5 dbm (TPC) WiFi...

This manual is also suitable for:

B760m pro rs/d4 wifi

Table of Contents

Save PDF