PetSafe Spray Bark Collar PBC00-16368, PBC17-16369 - Collar for Dogs Manual

Also See for Spray Bark Collar PBC00-16368:

Product manual (13 pages)

Table of Contents

Contents

1 Welcome
2 In the Box
3 How it Works
4 Charge the Spray Bark Collar
5 Add the Spray Refill Cartridge
6 Fit the Collar
7 Test the Collar
8 Function and Response Table
9 Ensure a Proper Spray Pattern
10 What to Expect During Use
11 Tips and Maintenance
12 FREQUENTLY ASKED QUESTIONS
13 IMPORTANT SAFETY INFORMATION
14 Customer Care
15 Documents / Resources
- 15.1 References
- 15.2 Download manual

PetSafe Spray Bark Collar PBC00-16368, PBC17-16369 - Collar for Dogs Manual

Welcome

You and your pet were made for each other. Our aim is to help you have the best companionship and the most memorable moments together. Your PetSafe^® Spray Bark Collar is designed to safely eliminate nuisance barking.
We know that safe pets make happy owners. Before getting started, please take a moment to read through the important safety information. If you have any questions, please don't hesitate to contact us.
Hereinafter Radio Systems Corporation and any other affiliate or Brand of Radio Systems Corporation may be referred to collectively as "We" or "Us".

In the Box

How it Works

The PetSafe^® Spray Bark Collar effectively deters nuisance barking when it is worn. The sound and vibration of your dog's bark triggers the bark sensor, which emits a burst of spray.
The collar works with unscented or citronella spray. Both spray options are safe and will distract your dog and interrupt the unwanted behavior.
As an added safety feature, the Spray Bark Collar will automatically shut off for 3 minutes if your dog barks 15 times or more within a 50-second period.

Charge the Spray Bark Collar

Excessive charging can shorten battery life. Only charge your collar when the batteries are low.

Plug in and fully charge the collar (1A). This can take up to 6 hours.
When fully charged, the green LED on the collar will turn off.
Replace the rubber cover after charging.

To Turn the Collar On

Press and hold the on/off button until the collar beeps low to high, and then release (1B). The green LED will be illuminated during the button press.

To Turn the Collar Off

Press and hold the on/off button until the collar beeps high to low, and then release. The red LED will be illuminated during the button press and will turn off when the collar turns off.

Battery Life

Average battery life is 40 hours, depending on how often your dog barks. However, due to greater use during your dog's training, the first week may not last as long.
Quick Tip: When not using the collar, turn it off to extend battery life.

Add the Spray Refill Cartridge

Ensure the collar is off.
The refill cartridge is located on the bottom of the collar.
Press and slide the button and the refill cartridge door will open (2A).
Ensure the shipping cap is removed off the refill cartridge before inserting into the collar (2B).
Close the cartridge door (2C).

Do not expose the device to freezing temperatures (-32°F or 0°C) or to conditions warmer than 113°F or 45°C. Do not leave the unit in direct sunlight. Never leave the unit in a car where the device can heat up to high temperatures (113°F or 45°C).
NOTE: Citronella and unscented refill cartridges can be purchased from www.petsafe.com.

CONTENTS UNDER PRESSURE.
CONTAINER MAY EXPLODE IF HEATED. Do not expose to heat or store at temperatures above 120°F or 49°C. Do not puncture. Do not burn. Protect from sunlight. Store away from heat. Store in a well-ventilated place. This product is not a toy. Keep it away from the reach of children. Use it only for its bark stopping purpose.
FIRST AID TREATMENT: If inhaled, get medical attention if you feel unwell. After skin contact, rinse affected area with soap and water. After eye contact, rinse/flush eyes gently using water for 15-20 minutes.

Fit the Collar

The proper fit and placement of the Spray Bark Collar is important for effective operation. The bark sensor must have direct contact with your dog's skin on the underside of his neck.

Be sure the collar is turned off before placing it on your pet. Then with your pet standing (3A), fit the collar snugly onto your pet's neck so that the bark sensor makes contact with your pet's skin on the underside of his or her neck. Make sure the PetSafe right-side up (3B).
Check the tightness of the collar by inserting one finger between the end of the bark sensor and your pet's neck (3C). The fit should be snug but not constricting.
Allow your pet to wear the collar for a few minutes, then check it again.

You may need to trim the hair in the area of the contact points. Never shave your pet's neck; this may lead to a rash or infection.
Once you are satisfied with the fit of the collar, remove it from your pet and trim it, but make sure to allow room for growth or a thicker winter coat. Use a lighter to seal the cut so that it will not fray.
The collar will slip if it is not properly threaded onto the strap. The slide buckle prevents the collar from becoming loose around your pet's neck and the ridges must be facing up (3D).

The collar should not be worn for more than 12 hours out of every 24-hour period. Leaving the collar on too long could lead to skin irritation.
NOTE: The collar is water resistant. It should not be submerged. Please remove the collar from the dog before bathing, swimming or any other activities that the collar could be submerged under water.

Test the Collar

Plug the charger into the Spray Bark Collar (4A, 4B).
While the charger is plugged in, press and hold the on/off button.
Continue to hold the on/off button while unplugging the charger from the Spray Bark Collar. A yellow LED will appear.
Release the on/off button. After a 2 second delay, the following will begin: the Spray Bark Collar will emit a tone then release spray. Then, it will sound the normal power off tone and turn itself off. Ensure the spray port is pointed away from your face.
The test can be stopped at any time by pressing the on/off button.

Function and Response Table

Function	LED Light Response	Beep Response
Spray collar is turned on	Green LED illuminates	Beeps low to high
Spray collar is turned off	Red LED illuminates	Beeps high to low
Collar is on	Green LED Light flashes once every 5 seconds	None
Spray activation	None	None
Low battery condition	Red LED Light flashes 3 times every 5 seconds	None
Low spray warning	Yellow LED flashes once every 5 seconds for good battery Yellow LED flashes 3 times every 5 seconds for low battery	None
Testing	Yellow LED Light appears	Beeps
No refill cartridge	Red and green LED's alternate flashing for 5 seconds, the collar will turn off	4 beeps
Spray collar is on/Cartridge is empty (will not spray)	Yellow LED flashes once every 5 seconds for good battery Yellow LED flashes 3 times every 5 seconds for low battery	None
Turning collar on/Cartridge is empty (will not spray)	Yellow LED flashes 2 times	2 beeps

Ensure a Proper Spray Pattern

For the PetSafe^® Spray Bark Collar to perform properly, the nozzle must be positioned correctly and there must be a clear path from the spray nozzle to your dog's snout. Follow these steps:

Make sure the PetSafe^® logo on the front of the collar is upright and the spray nozzle is angled out and pointing up towards the dog's snout (5A).
For long-haired dogs, it may be necessary to trim the neck hairs along the path of the spray. It is important that the spray reaches the dog's snout to be effective.

Do not shave the pet's neck as this may increase the risk of skin irritation.

What to Expect During Use

Do not leave your dog alone the first few times he receives a correction.
Place the collar properly on your dog and wait nearby until he barks. Most dogs will understand very quickly that the collar is disrupting their urge to bark and will relax and stop barking. Because the spray may be surprising or startling at first, some dogs may bark more at the initial correction.
On rare occasions, a dog may begin barking at the correction. If this happens, reassure your dog with a calm voice. As your dog relaxes, he will understand that if he becomes quiet, he will not receive any more spray corrections. The number of dogs that have this reaction typically will only have it the first time they wear the Spray Bark Collar.
You should notice a reduction in your dog's barking within the first couple of days that he wears the Spray Bark Collar. At this point, it is important to remember the learning process is still not complete. Dogs will "test" this new learning experience and may increase their attempts to bark. This usually occurs during the second week a dog wears the Spray Bark Collar. If this does occur, remain consistent and do not alter your use of the Spray Bark Collar. You must place the Spray Bark Collar on your dog in every situation when you expect him to be quiet. If your dog is not wearing the Spray Bark Collar, he may resume barking and his learning will suffer a setback.

Tips and Maintenance

Before playing with your dog, remove the Spray Bark Collar. The activity may cause your dog to bark, which could lead to him associating the play with the burst of spray.
To ensure that your dog does not make the connection between you and the spray collar, don't let him see you prepare the collar for the first try, or for subsequent use. Keep your dog away while you prepare the collar as well as when you replace the refill cartridge or charge the battery.
Remove all other collars with metallic parts or tags. These could create noise that may needlessly activate the spray collar.
To ensure effectiveness, avoid letting your dog wear the collar with an empty cartridge.
Turn off the collar while not in use.
The PetSafe^® Spray Bark Collar should only be used with pets that are over 6 months of age.
If your pet is injured or its mobility is otherwise impaired, contact your veterinarian or professional trainer before use.
Do not leave your collar unattended where your dog could accidentally damage it through chewing.
The spray from the bark collar may stick to the hair under your dogs snout. Clean your dog's hair weekly with a washcloth and a mild hand soap. Rinse and dry your dog's neck thoroughly.
If the spray accumulates on the bark collar, wipe the receiver clean with a damp cloth and dry thoroughly.

FREQUENTLY ASKED QUESTIONS

How old does a pet have to be before using the Spray Bark Collar?	Your pet should be at least 6 months old before using the Spray Bark Collar. The collar may be too large for dogs under 8 lb.
Will the Spray Bark Collar work for my dog?	The Spray Bark Collar is safe and effective for most breeds and sizes of dogs, though it may be too large for dogs under 8 lb. to wear comfortably.
Can I attach a leash to the Spray Bark Collar?	No. This can result in pulling the bark sensor too tightly against your dog's neck. Attach a leash to a separate, non-metallic collar or a harness, making sure the extra collar does not put pressure on the bark sensor.

IMPORTANT SAFETY INFORMATION

Explanation of Attention Words and Symbols used in this Product Manual
warning This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION, used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

CAUTION, used without the safety alert symbol, indicates a hazardous situation which, if not avoided, could result in harm to your pet.

Not for use with aggressive dogs. Do not use this product if your dog is aggressive, or if your dog is prone to aggressive behavior. Aggressive dogs can cause severe injury and even death to their owner and others. If you are unsure whether this product is appropriate for your dog, please consult your veterinarian or certified trainer.
Do not puncture or incinerate the collar or the refill cartridge. Do not expose to extreme heat or store at temperatures above 113°F or 45°C.
Lithium Rechargeable Batteries This device contains Lithium-Ion (Li-Ion) batteries; never incinerate, puncture, deform, short-circuit, or charge with an inappropriate charger. Fire, explosion, property damage, or bodily harm may occur if this warning is not followed.
Do not expose the device to freezing temperatures (-32°F or 0°C) or to conditions warmer than 113°F or 45°C. Do not leave the collar in direct sunlight. Never leave the collar in a car where the device can heat up to high temperatures (113°F or 45°C).

Contains gas under pressure; may explode if heated.
Wear protective gloves/ eye protection/ face protection.
Do not breathe dust/ fume/ gas/ mist /vapors / spray.
In case of inadequate ventilation, wear respiratory protection.
If exposed or concerned: Get medical advice/ attention.
Protect from sunlight. Store in a well-ventilated place. Do not puncture. Do not burn.
Keep out of reach of children.

FIRST AID TREATMENT:
If inhaled, get medical attention if you feel unwell. After skin contact, rinse affected area with soap and water. After eye contact, rinse/flush eyes gently using water for 15-20 minutes.

This product is not a toy. Keep it away from the reach of children. Use it only for its bark stopping purpose.

Risk of skin damage. Please read and follow the instructions in this manual. Proper fit of the collar is important. A collar worn for too long or made too tight on the pet's neck may cause skin damage. Ranging from redness to pressure ulcers; this condition is commonly known as bed sores.

Avoid leaving the collar on the dog for more than 12 hours per day.
When possible, reposition the collar on the pet's neck every 1 to 2 hours.
Check the fit to prevent excessive pressure; follow the instructions in this manual.
Never connect a leash to the electronic collar.
When using a separate collar for a leash, don't put pressure on the electronic collar.
Wash the dog's neck area and the contact area of the collar weekly with a damp cloth.
Examine the contact area daily for signs of a rash or a sore.
If a rash or sore is found, discontinue use of the collar until the skin has healed.
If the condition persists beyond 48 hours, see your veterinarian.
For additional information on bed sores and pressure necrosis, please visit our website.

The PetSafe^® Spray Bark Collar must be used only on healthy dogs. We recommend that you take your dog to a veterinarian before using the collar if he is not in good health.