PRODUCT DESCRIPTION The BiDi Multi sensor is a universal multi-sensor. In addition to motion detection, the device measures temperature, humidity and light inten- sity. The sensor has a built-in accelerometer that detects any tampering with the device. It’s a battery powered device designed for quick and easy installation on any surface.
Page 3
For detailed instructions on the procedure, please refer to the manual of the hub which the sensor is to be used with. 3.1 - Pairing with the Yubii Home or Home Center 3 hub during start-up - an unpaired device Table A1 - BiDi Multi sensor - Pairing with Yubii Home or Home Center 3 hub - unpaired device Steps Open the device housing.
Page 4
INSTALLATION AND OPERATION 4.1 - Motion detection The sensor detects movement using a passive infra red (PIR) sensor and reports it to the hub. The detection of movement is signalled with flashing red. Motion is detected within approx. 90° radius, within a range of up to 6 m. The detection range of the sensor is shown below. Actual sensor range canbe affected by environmental conditions.
If it’s necessary to restore the factory settings of the sensor, follow the steps from the table below: Note When restoring the factory setting, all settings and paired hubs are deleted. Table A3 - BiDi Multi sensor - Restoring factory settings Steps Open the device housing.
ADVANCED PARAMETERS You can adapt the operation of BiDi Multi sensor to your needs. These settings are available in the NICE interface in the form of simple op- tions that can be selected by ticking the appropriate box. Table A4 - BiDi Multi sensor - Advanced parameters...
All technical specifications stated in this section refer to an ambient temperature of 20 °C (± 5 °C). Nice S.p.A. reserves the right to apply modifications to the product at any time when deemed necessary, while maintaining the same function- alities and intended use.
Page 8
Nice SpA Oderzo TV Italia www.niceforyou.com info@niceforyou.com...
Need help?
Do you have a question about the BiDi Multi sensor and is the answer not in the manual?
Questions and answers