Charging The Battery - Empi EPIX VT Instruction Manual

User Information
Changing the Battery continued
Caution: Inserting the battery incorrectly may cause the battery to
rupture or generate intense heat if allowed to remain in the
incorrect position. This may cause irreversible damage to the
battery. If there are signs of this type of damage, discard or
recycle the battery and order a replacement.
The proper disposal of rechargeable batteries may be
& regulated in your area. Contact your local waste
management official for information regarding the
environmentally sound collection, recycling and disposal
of these batteries.
Ni-Cd
Figure 6. Battery Compartment
Charging the Battery
If you purchased a rechargeable battery system, you will typically
charge one battery while using the other. If the Low Battery
Indicator flashes, recharge the battery as soon as possible.
Caution: Do not attempt to charge alkaline batteries or any battery
other than an Empi rechargeable battery.
Figure 7. Battery Charger
1. Place the battery in the charger (Figure 7). The battery should
Slide in easily. If force is required, you may be putting the battery
in backwards. Check the "+" and "-" markers.
Caution: The battery may overheat and rupture if it is inserted
backwards.
2. Plug the charger into any standard 110V/60Hz outlet. The
battery should be fully charged within 14 hours.