Subscribe to Our Youtube Channel
Related Manuals for Planet UPOE-800G
Summary of Contents for Planet UPOE-800G
- Page 1 8-/16-/24-Port Gigabit 802.3bt PoE++ Managed Injector Hub UPOE-800G/UPOE-1600G/UPOE-2400G Quick Installation Guide...
-
Page 2: Table Of Contents
Table of Contents 1. Package Contents ..................3 2. Requirements ....................4 3. Starting Web Management ................5 4. Recovering Back to Default Configuration ............10 5. Customer Support ..................11... -
Page 3: Package Contents
1. Package Contents Thank you for purchasing PLANET 8-/16-/24-Port Gigabit 802.3bt PoE++ Managed Injector Hub, UPOE-800G/UPOE-1600G/UPOE-2400G. “802.3bt PoE++ Managed Injector Hub” mentioned in this quick installation guide refers to the UPOE-800G/ UPOE-1600G/UPOE-2400G. 10/100/1000T Data + 10/100/1000T Data 10/100/1000T RJ45 Model Name... -
Page 4: Requirements
2. Requirements z Workstations running Windows 7/8/10/11, macOS 10.12 or later, Linux Kernel 2.6.18 or later, or other modern operating systems are compatible with TCP/IP Protocols. z Workstations are installed with Ethernet NIC (Network Interface Card) z Ethernet Port Connection Network cables -- Use standard network (UTP) cables with RJ45 connectors. -
Page 5: Starting Web Management
3. Starting Web Management The following shows how to start up the Web Management of the 802.3bt PoE++ Managed Injector Hub. Note the 802.3bt PoE++ Managed Injector Hub is configured through an Ethernet connection. Please make sure the manager PC must be set to the same IP subnet address. For example, the default IP address of the 802.3bt PoE++ Managed Injector Hub is 192.168.0.100, then the manager PC should be set to 192.168.0.x (where x is a number between 1 and 254, except 100) and the default subnet mask is... - Page 6 Default Username: admin Default Password: admin The following web screen is based on the UPOE-2400G. The displays of the UPOE-800G and UPOE-1600G are the same as that of the UPOE- 2400G. Figure 3-2: Web Login Screen 3. After entering the password, the main screen appears as Figure 3-6 shows.
- Page 7 (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation. PLANET Technology Corp. Made in Taiwan Figure 3-3: 802.3bt PoE++ Managed Injector Hub MAC ID Label...
- Page 8 6. After logging in, you will be prompted to change the initial password to a perma- nent one. Figure 3-5: Create a New Password 7. Enter the default username and password, then set a new password according to the rule-based prompt and confirm it. Upon success, press any key to return to the login prompt.
- Page 9 The 802.3bt PoE++ Managed Injector Hub Menu on the top of the Web page lets you access all the commands and statistics the 802.3bt PoE++ Managed Injector Hub provides. The 802.3bt PoE++ Managed Injector Hub Menu always contains one or more buttons, such as “System”, “Network”, “Security”, “PoE” and “Maintenance”.
-
Page 10: Recovering Back To Default Configuration
10 seconds. After the device is rebooted, you can log in the management Web interface within the same subnet of 192.168.0.xxx. 802.3bt PoE ++ 8-Port Gigabit Managed Injector Hub UPOE-800G LNK/ACT bt PoE-in-Use at/af PoE-in-Use PoE-in-Use SYS PWR... -
Page 11: Customer Support
Thank you for purchasing PLANET products. You can browse our online FAQ resource and User’s Manual on PLANET Web site first to check if it could solve your issue. If you need more support information, please contact PLANET switch support team.
Need help?
Do you have a question about the UPOE-800G and is the answer not in the manual?
Questions and answers