BIRO 33 Operating And Service Parts

8/Rll
Model 33
Power Meat Cutter
Operating and Service Parts
Identification Manual
Appl i cable on Md 33 Serial No. 33
19690 Except as Noted
The BIRO Model 33 Power Meat Cutter was manufactured from December 26, 1945 to
June 17, 1969 when it was replaced by the BIRO Model 3334 Power Meat Cutter.
This manual ls published and supplied as an aid to purchase replacement parts for
those machines still In service.
Please check your machine
attached to your machines.
Manufacturing Company, phone (419) 798-4451 and the wamlng •abets wtH be sent at
"no
P [ease review the WARNING
charge".
When ordering replacement parts, the machine pictured may not exactly match your
machine. The serial number is located on model plate riveted to the head and Is
stamped on the top of the base structure. Please give the serial number of your ma­
chine when ordering parts.
If the model plate is lost, please give the following Information which will help identify
the vintage of your unit.
1. The base feet - are they square or round? If round, the diameter of pipe leg.
2. Does the right base door have a split door (pictured on Page 5) or is it one
piece (full length)?
3. What is the distance between the platter rods (Item #15212W - Page 6)?
4. What is the length of the channel (Item No. S120S, Page 5) the meat carriage
travels in?
5. Does the meat carriage (Item No. A33155, Page 6) have four or six bearings?
contact The BIRO Manufacturing Company for a BIRO Authorized Service
Please
Agency nearest you.
THE BIRO .MANUFACTURING COMPANY
PHONE (419) 798-4451 • FAX (419) 798
to see that warning
If there are no warning
(Page
.MARBLEHEAD, OHIO 43440-2099
Power Cutters Since 1921
label• (Item No. 653, Pagee 5 & 6) are
labele, prease advise The BIRO
2, 1 through 15).
9106
"'.