Maintenance - pyrexx XSD200 User Manual

13 Maintenance

13.1 Maintenance
You must perform visual and function
tests at regular intervals.
Visual inspection
Perform a visual inspection once a year:
f Make sure that the smoke intake
lamellas are not blocked
(e.g. by dust, dirt, paint).
f When doing this, ensure that the
device is not damaged and securely
mounted in its location.
Functional check Functional check
As smoke alarm devices are electronic
devices, trigger a test tone regularly, at
least once a year:
f If no test tone sounds, the device
must be replaced.
76
User Manual: XSD200 - Smoke Alarm Device with Radio Link
Device test tone Device test tone
Regularly trigger a test tone, at least
once a year:
f Press the testing/stop button for
approx. 2 to 3 seconds.
Short test tone,
single device
If you repeat the test alarm within
10 minutes, certain device variants
will sound a short, double test tone .
Radio group test tone Radio group test tone
Regularly trigger a test tone, at least
once a year:
f Observe chapter 9.1 "Radio group
connection test" on page 68.
f Observe chapter "Defective connection
test of a radio group" on page 74.
Test tone to the shared radio group Test tone to the shared radio group
Regularly trigger a test tone, at least
once a year:
f Observe chapter 9.2 "Connection
test to the shared radio group" on
page 68.
EN