Table of Contents
Advertisement
Quick Links
Hardware Installation
1.
Install two AA batteries in the mouse and two AA batteries in the keyboard.
2.
You can connect the receiver to a USB port of a
Turn on your computer.
3.
Software Installation
1. Make sure the mouse and keyboard is connected to the computer.
2. Put the Setup disk (or CD) into the disk drive.
3. Follow the instructions on the screen to finish the software installation.
Replace Batteries
If you feel the mouse does not move smooth as usual or the keyboard does not work
when typing, then the batteries have lost their charge, so please replace them.
Furthermore, do not mix or use different types of batteries at the same time. You
should set up the channel every time you replace the batterires.
ID channel setting
The channel buttons are factory preset. The green LED, the data transmission indica-
tor, on the receiver will be lit when the keyboard or mouse is in normal operation. If
your keyboard/mouse does not work, then you have to set the ID channel setting.
Please press the button on the receiver first (RB) and press the button under the
mouse (MB) and the keyboard (KB) within twenty seconds. So you press RB, MB
and KB to set the channel setting.
Charging
If you need to buy new batteries to recharge, please choose two Ni-MH
(Nickel-Metal-Hydride) AA rechargeable batteries, 1.2V, 1300 to 1600 mAH or AAA
rechargeable batteries, 1.2V, 600 to 800 mAH. Please do not mix or use other types
of batteries in the battery charger such as Li-ion, Ni-Cad, Alkaline, etc. The red LED
on the receiver shows the battery-recharging status (from LED completely "on" to
"off" for battery full).
ENGLISH
PC.
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Genius LMPRO
Summary of Contents for Genius LMPRO
-
Page 1: Hardware Installation
3. Follow the instructions on the screen to finish the software installation. Replace Batteries If you feel the mouse does not move smooth as usual or the keyboard does not work when typing, then the batteries have lost their charge, so please replace them. - Page 2 USB connector into the PC directly and remember do not put the batteries in the wrong direction, use the same types of batteries, and do not recharge via the USB hub, that will make your receiver, main-board and hub burn or become non-usable easily.
-
Page 3: Button Assignments
1. Mouse: Button Assignments The Button Assignment feature lets you work in a more efficient way because you can assign the most frequently used commands in Windows to the mouse buttons. Magic-Roller Press the “Magic-Roller” to surf the Internet and Windows docu-... - Page 4 Click this function and the pan icon appears. You can move the mouse in any direction in a document or a spreadsheet. The farther you move the pointer from the pan icon, the faster you can pan in that direction. Click this function and Office EasyJump Frisbee will always be on the screen and the button will change to .
- Page 5 Click this function to return to the previous web page in your open Internet browser. Click this function to more forward to the next web page in your open Internet browser. Click on this application to launch Windows media player or any other multi- media player installed in your system.
- Page 6 Press the “Ctrl” key and move the “Magic-Roller” forward (or backward) to set the Zoom In/Out function. You can also use just one hand to Zoom In/Out: set the right button to be the “Ctrl” function, press the right button and move the “Magic-Roller”...
- Page 7 Customize the Software This section shows you how to customize the software. To open the software control panel, you can double-click on the icon in the task bar or select the “Software” icon from the program group. Close the Software Click the right button on the taskbar, and select “Close Software”...
Need help?
Do you have a question about the LMPRO and is the answer not in the manual?
Questions and answers