5
Troubleshooting
Camera problems
For step-by-step product support, visit
Getting Service & Repairs.
If...
Camera does not
turn on
Camera does not turn off
Camera buttons and
controls do not function
EVF/LCD screen is black or
does not turn on
In Review, a blue or black
screen is displayed instead
of a picture
Pictures remaining number
does not decrease after
taking a picture
Picture orientation is not
accurate
Flash does not fire
70
www.kodak.com/go/p880support
Try one or more of the following
■
Remove battery and verify that it's the correct type, then
reinsert it.
■
Insert a charged battery.
■
Connect the camera to a Kodak 5-volt AC adapter (sold
separately), then try again. See
information.
■
Remove the lens cap.
■
Push the EVF/LCD toggle button to change display.
■
Press any button to restore the EVF/LCD from Stand By.
■
Turn the camera off, then on again to restore power.
■
Transfer all pictures to the computer (see
■
Take another picture. If problem continues try internal
memory or another memory card. Download all the images,
then format the card and try using the card again in the
camera.
■
Continue taking pictures. The camera is operating normally
(The camera estimates the number of pictures remaining after
each picture is taken, based on picture size and content.)
■
Set the Orientation Sensor to ON
■
Open the flash unit
■
Check the flash setting and change as needed
page
2for more battery
(page
(page
10).
www.kodak.com/go/support
and select
page
19).
51).
(page
37).