Upgrading Your Software And Firmware; Additional Care And Maintenance - Kodak P880 ZOOM User Manual

Visit www.kodak.com/go/p880accessories
Kodak EasyShare camera dock—powers your camera, transfers pictures to your
computer, and charges the included Kodak Li-Ion rechargeable battery.
Kodak EasyShare printer dock—powers your camera, makes
4 x 6 in. (10 x 15 cm) prints with or without a computer, transfers pictures, and
charges the included Kodak Li-Ion rechargeable battery.
Kodak 5-volt AC adapter—powers your camera.
IMPORTANT: Do not use the AC adapter included with the Kodak EasyShare camera dock
or printer dock to power your camera.

Upgrading your software and firmware

Download the latest versions of the software included on the Kodak EasyShare
software CD and the camera firmware (the software that runs on the camera). See
www.kodak.com/go/p880downloads.

Additional care and maintenance

■ If the camera has been subjected to inclement weather or you suspect water has
gotten inside the camera, turn off the camera and remove the batteries and card.
Allow all components to air-dry for at least 24 hours before using the camera
again.
■ Blow gently on the lens or camera screen to remove dust and dirt. Wipe gently
with a soft, lint-free cloth or an untreated lens-cleaning tissue. Do not use cleaning
solutions unless designed specifically for camera lenses. Do not allow chemicals,
such as suntan lotion, to contact painted surfaces.
Service agreements may be available in your country. Contact a dealer of Kodak
■
products for more information.
■ For digital camera disposal or recycling information, contact your local authorities.
In the US, visit the Electronics Industry Alliance Web site at
Kodak Web site at www.kodak.com/go/p880support.
www.kodak.com/go/support
for:
Appendix
www.eiae.org or the
89