Drive mode
Exposure
Bracketing 3
Flash forced off.
(Unavailable in TIFF.)
Exposure
Bracketing 5
Flash forced off.
(Unavailable in TIFF.)
Time Lapse Burst
Flash forced off.
(Unavailable in TIFF.)
1 Set the Drive mode to the desired option,
2 Press the Shutter button halfway to set the AE/AF.
3 For all settings, except Burst, press the Shutter button completely down and
release it to take the picture.
For Burst settings, press the Shutter button completely down
and hold it. The camera stops taking pictures when you release the Shutter
button, all pictures are taken, or there is no more storage space.
NOTE: To cancel self-timer and shutter delay during countdown, press the Shutter button again.
NOTE: During quickview you can delete all pictures in the burst series. To delete selectively, do so in
Review (see
page
www.kodak.com/go/support
Description
Camera takes 3 pictures at a selected interval of 1/3, 2/3, or
1.0 EV. Determine the best exposure level for your
conditions based on your evaluation of 3 pictures.
Camera takes 5 pictures at a selected interval of 1/3, 2/3, or
1.0 EV. Determine the best exposure level for your
conditions based on your evaluation of 5 pictures.
Camera takes specified number of pictures (2–99) at
specified intervals (10 seconds–24 hours).
17).
Doing more with your camera
page
30.
31