Setting The Iso Speed - Kodak P880 ZOOM User Manual

WB option
Fluorescent Corrects the green cast of fluorescent lighting. Ideal for indoor pictures
Click WB
Custom

Setting the ISO speed

The ISO speed controls sensitivity of the camera sensor. Higher settings are more
sensitive to light, but may produce unwanted "noise" in a picture. Auto and SCN
mode settings automatically adjust the camera sensitivity to the light conditions.
Within PASM and C modes, the ISO button lets you adjust the setting.
NOTE: For rapid setting changes, see
ISO speed setting for selected picture size:
ISO
ISO 50–400
ISO 400–1600
NOTE: For selecting Picture size, see
www.kodak.com/go/support
Description
under fluorescent lighting without flash.
Captures a representative white surface for a more precise setting.
Follow the screen prompts for Setup.
Uses a saved White balance setting that has been registered as a
Custom white balance (see table on
page 43.
Picture size (MP)
3.1 MP, 5.0 MP, 7.1 MP, and 8.0 MP
Available only in 0.8 MP
page 47.
Doing more with your camera
page 54).
Press ISO.
1
(Press again to exit.)
to highlight an option.
2
Press OK or Set.
3
The active icon is displayed
in the EVF/LCD screen.
41