Download Print this page

Site Specifications; Space Requirements; Operating Environment - Kodak LED II PRINTER 20R - SITE Specifications

Advertisement

Section 1: Site Specifications

Space Requirements

Dimensions and Weight (Uncrated)
Width
Printer:
102 cm (40 in.)
Processor:
87.6 cm (34.5 in.)
Roll-to-roll Printer:
102 cm (40 in.)
Site Access:
Doorways to the site should be 91centimetres (36 inches) wide, or larger. The front and rear PRINTER FRAME
DOORS, SHEET TRANSPORT MODULE DOORS, and the OPERATOR CONTROL PANEL (OCP) must be
removed to move the PRINTER through a 36 inch doorway.
Minimum acceptable door size is 71.2 centimetres (28 inches). The enclosures, covers, and subassemblies for the
PAPER SUPPLY MODULE, the KNIFE AND SHEET TRANSPORT MODULE, and the TAKE-UP MODULE†
must be removed to move the PRINTER through a 28 inch doorway.
† Roll-to-roll system only.
Operator and Service Access:
When fully assembled, the system requires a minimum of 91 cm (36 in.) on each side to allow access for service and
operator maintenance.
Floor:
The system should be installed on a smooth, hard, and level floor surface. Floor pitch should not exceed 1 inch in 5
feet.

Operating Environment

The unit to be installed is an Insulation Catagory Type II machine and operates in a Pollution Degree 2 environment
in accordance with IEC 664 ( Normal Office Environment ).
Description
Temperature*
Relative Humidity
Altitude
Lighting
* Room temperature changes of more than 5 degrees during operation will require recalibration of the PRINTER.
**Although the PRINTER and PROCESSOR operate in normal room lighting, access to a darkroom is required for
loading paper into cassettes.
SS2616-1 – 23NOV99
Length
149 cm (58.5 in.)
130 cm (51 in.)
without removable print
rack.
198 cm (78 in.) with print
rack installed.
189 cm (74.5 in.)
Specification
15.5-26.6°C (60-80° F) for unplumbed
systems15.5-30° C (60-86° F) for plumbed
systems
15-76%
0-2000 metres (6562 feet)
maximum of 325 lux **
(30.2 foot-candles)
Weight
420 kg (925 lbs)
429 kg (945 lbs) with
paper.
172 kg (380 lbs)
312 kg (471 lbs) with
processing chemicals.
510 kg (1125 lbs)
519 kg (1145 lbs) with
paper.

Site Specifications

3

Advertisement

loading

This manual is also suitable for:

Rp 50 - siteProfessional led ii 20pProfessional led ii 20rProfessional led ii processor 20p