Advertisement
SITE SPECIFICATIONS
Space requirements for a roll-to-roll system
2.2 meters + .3 meters (86 in. + 12 in.)
.91 meters (36 in.)
minimum
*
SCSI−2 connection from host here
External modem connection here
G130_0601DA
SCSI Connection to Host Computer:
The proper configuration of the SCSI-2 connection will depend on the distance of the host computer from the
PRINTER.
A single-ended connection can be used if the total distance is less than 6 metres (19.7 feet). The customer must supply
a SCSI-2 data CABLE (FAST 20 type) and a SCSI-2 TERMINATOR for single-ended connection. An active FPT
type (forced perfect termination) SCSI-2 TERMINATOR is recommended.
A differential connection must be used if the distance is between 6 and 22.9 metres (19.7 and 75 feet). The customer
must supply a SCSI- 2 data CABLE and a SCSI-2 TERMINATOR for differential connection. A differential SCSI-
2 TERMINATOR is required.
Switching from a single-ended to a differential SCSI-2 connection requires a reconfiguration of the FEE BOARD.
Refer to the INSTALL INSTRUCTIONS for detailed information on how to do this.
Locate SCSI-2 CABLES away from any source of electrical interference (e.g. transformers, fluorescent light ballast).
6
_
.91 meters (36 in.)
1.5 meters (60 in.)
.91 meters (36 in.)
_
15A
minimum
*
Printer
minimum
3.8 meters (149 in.)
2.9 meters
(114 in.)
.91 meters (36 in.)
minimum
23NOV99 – SS2616-1
Advertisement
