Troubleshooting
Problem
A memory card is
inserted in the Wi-Fi
card slot
Picture quality
Problem
Picture is too dark
Picture is too light
75
Cause and/or solution
■
Using a separate memory card to remove it: with contacts facing
out, insert the card into the Wi-Fi card slot. Gently push the card
against the inserted card to unseat it from the connector. Remove
the card by inverting the camera.
Cause and/or solution
■
Reposition the camera for more available light.
■
Use Fill flash
(page
the subject.
■
Move so that the distance between you and the subject is within the
effective flash range
■
To automatically set exposure and focus, press the Shutter button
halfway. When the AF framing brackets turn green, press the
Shutter button completely down to take the picture.
■
Increase the exposure compensation
■
Reposition the camera to reduce the amount of available light.
■
Turn flash off
(page
■
Move so that the distance between you and the subject is within the
effective flash range
■
To automatically set exposure and focus, press the Shutter button
halfway. When the AF framing brackets turn green, press the
Shutter button completely down to take the picture.
■
Decrease the exposure compensation
15) or change your position so light is not behind
(page
15).
(page
15).
(page
15).
(page
www.kodak.com/go/support
30).
30).