Kodak EASYSHARE ONE User Manual page 53

Setting up a network profile
When you connect to a secure network, designated by a padlock,
connect to an any network more than once, a profile containing the network settings
is stored on your camera. Depending on the network settings, you may need to create
a network profile to connect to it.
For example, if the network is not broadcasting it's SSID, or network name, the
network does not appear as an available network on your camera. However, if you
know the SSID and other information about the network, you can manually create a
profile which will allow your camera to connect:
1 In View , press the Menu button, then select Setup.
2 Select Wireless
3 Select Profiled Networks.
4 Select Add Network Profile.
5 Select and change settings to match the network you want to connect to. When
finished, touch Done.
For more information, visit
Choosing or changing a network connection
If you are connected to a Wi-Fi wireless network and you want to switch the
connection to a different network, select another available network on your camera:
1 In View , press the Menu button, then select Setup.
2 Select Wireless
3 To see a list of networks that are broadcasting in your vicinity, select Available
Networks.
To see a list of networks stored on your camera, select Profiled Networks.
4 Select a network from the list. If prompted, enter a security key code for the
network. (Ask the network administrator for this information if it is unavailable.)
For more information, visit
www.kodak.com/go/support
Using your camera with a Wi-Fi wireless network
.
www.kodak.com/go/wifisupport
.
www.kodak.com/go/wifisupport
, or if you
or www.wi-fi.org.
or www.wi-fi.org.
46