Kodak EASYSHARE ONE User Manual page 61

Sync and transfer with a USB connection
When you connect your camera to a computer using the USB cable, synchronization or
transfer starts automatically, depending on which option you choose the first time you
connect your camera. You can change this setting in EasyShare software any time.
Click the Help button in the Kodak EasyShare software for details.
CAUTION:
Install Kodak EasyShare software before connecting the camera or to
the computer. Failure to do so may cause the software to load
incorrectly.
www.kodak.com/go/support
Synchronizing and transferring to a computer
1 Install Kodak EasyShare software (see
2 Turn off the camera.
3 Plug the labeled
labeled USB port on your computer. See your
computer user's guide for details.
4 Plug the other end of the USB cable into the labeled
USB port on the camera.
5 Turn on the camera and follow the instructions on
the computer screen.
If this is the first time connecting to your computer,
the setup assistant will guide you through the
connection setup process. Be sure to choose a sync
& transfer option when prompted (see
Pictures and videos on your camera are synchronized
with or transferred to your computer according to the
sync & transfer settings in EasyShare software.
page
end of the USB cable into the
page
52).
53).
54