Kodak EASYSHARE ONE User Manual page 52

Using your camera with a Wi-Fi wireless network
If one or more wireless networks are available, the camera checks for network
■
profiles stored in the camera (see
– If the settings of a profile match the settings for an available network, a
connection is made according to the profile order.
– If a matching profile is not on the camera, the camera screen lists the
available networks. Select the network you want to connect to.
For each network on the list:
Connection type is designated with either
or
The presence of a padlock,
security key.
Relative signal strength is indicated by the number of escalating bars,
If prompted, enter a security key code for the network. (Ask the network
administrator for this information if it is unavailable.)
When a connection is made, the wireless network status light glows steady
green.
■ If a wireless network is not available or you are unable to connect:
– You may be out of the signal range. Move within range.
– The network may not be broadcasting it's SSID or network name, so it does
not appear as an available network on your camera. Set up a profile on
your camera to match the network settings (see
– Network settings may not match the settings in any of the profiles in your
camera. Set up a profile on your camera to match the network settings (see
page 46) and try again.
For more information, visit
45
(Ad Hoc).
. Green bars indicate a connection to the network.
www.kodak.com/go/wifisupport
page 46):
, indicates the network requires a
www.kodak.com/go/support
(Infrastructure)
page 46) and try again.
or www.wi-fi.org.