Wavetronix SmartSensor HD Manual page 11

The internal electronics of the RVSD shall utilize automation for surface mount assembly, and shall comply with the requirements
set forth in IPC-A-610C Class 2, Acceptability of Electronic Assemblies.
The RVSD shall undergo a rigorous sequence of operational testing to ensure product functionality and reliability. Testing shall
include the following:
• Functionality testing of all internal sub-assemblies
• Unit level burn-in testing of 48 hours' duration or greater
• Final unit functionality testing prior to shipment
Test results and all associated data for the above testing shall be provided for each purchased RVSD by serial number, upon
request.
16.0 Support. The RVSD manufacturer shall provide both training and technical support services.
16.1 Training. The manufacturer-provided training shall be sufficient to fully train installers and operators in the installa-
tion, configuration, and use of the RVSD to ensure accurate RVSD performance.
The manufacturer-provided training shall consist of comprehensive classroom labs and hands-on, in-the-field, installation
and configuration training.
Classroom lab training shall involve presentations outlining and defining the RVSD, its functions, and the procedures for
proper operation. These presentations shall be followed by hands-on labs in which trainees shall practice using the equip-
ment to calibrate and configure a virtual RVSD. To facilitate the classroom presentation and hands-on labs, the manufac-
turer-provided training shall include the following items:
• Knowledgeable trainer or trainers thoroughly familiar with the RVSD and its processes
• Presentation materials, including visual aids, printed manuals and other handout materials for each student
• Computer files, including video and raw data, to facilitate the virtual configuration of the RVSD
• Laptop computers or Windows CE handheld devices with the necessary software, and all necessary cables, connec-
tors, etc.
• All other equipment necessary to facilitate the virtual configuration of the RVSD
Field training shall provide each trainee with the hands-on opportunity to install and configure the RVSD at roadside.
Training shall be such that each trainee will mount and align the RVSD correctly.
16.2 Technical Assistance. Manufacturer-provided technical support shall be available according to contractual agree-
ments, and a technical representative shall be available to assist with the physical installation, alignment, and auto-configu-
ration of each supplied RVSD. Technical support shall be provided thereafter to assist with troubleshooting, maintenance,
or replacement of RVSDs should such services be required.
17.0 Documentation. RVSD documentation shall include a comprehensive user guide as well as an installer quick-reference
guide and a user quick-reference guide.
The RVSD manufacturer shall supply the following documentation and test results at the time of the bid submittal:
• Volume accuracy data, including performance analyses for:
Free-flowing traffic
•
Traffic with a lane roughly 8 ft. (2.4 m) beyond a 4-ft. (1.2 m) concrete barrier
•
6-ft. (1.8-m) and 240-ft. (73.2-m) lateral offset (simultaneous)
•
• Speed accuracy test data for both per-vehicle and average speed
• Occupancy accuracy test data
• Vehicle classification test data
• Auto-configuration documentation
• FCC CFR 47 certification
SmartSensor HD
11