Setting Focus Zone - Kodak EasyShare DX6440 User Manual

Setting Focus Zone

If you do not get the composition and focus results you want by using framing
marks (page 21), use the Focus Zone feature to select a large or a
concentrated area of focus.
NOTE: Focus Zone is available in Close-up and PAS modes.
1
In any Still mode, press the Menu button.
2 Press
Chapter 2
to highlight Focus Zone
3 Press
press the OK button.
4
Press the Menu button to exit the menu.
This setting remains until you change the
Mode dial or turn off the camera; or, if it
was set while in PAS mode, until you use
Reset
setting.
, then press the OK button.
to highlight an option, then
Multi-zone (default)— evaluates 3
zones to give an even picture focus. Ideal
for general picture taking.
Center zone—evaluates the small area
centered in the viewfinder. Ideal when
precise focus of a specific area in the
picture is needed.
(page 38) to return to the default
37