Turning On Liveview In Still Modes - Kodak EasyShare DX6440 User Manual

Turning On Liveview in Still Modes

The Liveview feature lets you use the camera screen as a viewfinder (see
page 20). The default setting is Liveview Off. You must press the OK button to
turn it on.
IMPORTANT: Liveview quickly depletes battery power; use it
sparingly.
To change the Liveview default to On:
1 Press the Menu button.
2 Press
3 Press
Chapter 6
to highlight Setup
to highlight Liveview
4
Press
OK button.
Liveview is now On by default. The
camera screen is on whenever the camera
is on (in Still or Video mode). You can
still press the OK button to turn Liveview
off and on.
5
Press the Menu button to exit the menu.
This setting remains until you change it.
, then press the OK button.
, then press the OK button.
to highlight On, then press the
65