Setting Focus Zone - Kodak EasyShare CX6445 User Manual

Setting Focus Zone

If you do not get the composition and focus results you want by using framing
marks (page 18), use the Focus Zone feature to select a large or a
concentrated area of focus.
NOTE: Focus Zone is available in Close-up mode.
1
In any Still mode, press the Menu button.
2 Press
34
Chapter 2
to highlight Focus Zone
3
Press
press the OK button.
4
Press the Menu button to exit the menu.
This setting remains until you change the
Mode dial or turn off the camera.
, then press the OK button.
to highlight an option, then
Multi-zone (default)— evaluates 3
zones to give an even picture focus. Ideal
for general picture taking.
Center zone—evaluates the small area
centered in the viewfinder. Ideal when
precise focus of a specific area in the
picture is needed.