Taking Videos; Taking A Video - Kodak EasyShare DX6440 User Manual

3

Taking Videos

Use Video mode
Before you take a video, make sure your picture storage location is set the way
you want it (see page
NOTE: Flash is not available in Video mode.
You can set Optical Zoom before, but not during, video recording.

Taking a Video

Ready
light
Self Timer/
Video light
4
To stop recording, press the Shutter button again.
Recording also stops if the storage location is full. See
video storage capacities.
NOTE: If you prefer, press the Shutter button completely down and hold it for
more than 2 seconds to begin recording. To stop recording, release the
Shutter button.
to take videos or to customize video-taking settings.
10).
1
Turn the Mode dial to Video
A live image, camera status, and the
recording time available appear on the
camera screen.
2 Use the viewfinder or camera screen to
frame your subject.
3 To begin recording, press the Shutter button
completely down and release within 2
seconds.
The Ready light blinks green, REC appears
on the camera screen, and the Self
Timer/Video light stays on while
recording.
.
page 108 for
43