Setting (Recording Rate, Speed, Odometer, Audible) - CycleOps Comp 200E Console Manual

Settings (Recording
Rate, Speed, Odometer,
Audible)
CYCLE COMPUTER
POWER ZONE
HEART RATE ZONE
USER INFORMATION
SETTINGS
RETURN
MODE
SELECT
Settings 3
3) Press [DOWN ARROW] to scroll to [SET-
TINGS] and press [SELECT].
Table 2
18
MAIN MENU
RETURN TO RIDE
SETUP USER RIDE
CLEAR MEMORY
TEST
SETUP
MODE
SELECT
Settings 1
1) From [MAIN MENU] press [DOWN
ARROW] to scroll to [SETUP USER RIDE] and
press [SELECT].
S
ETTINGS
COMPUTER
AVERAGE
ZEROS
RETURN
MODE
SELECT
Settings 4
4) Press [SELECT] to enter [COMPUTER]
mode.
R T R
ETURN O IDE
1 USER A
2 USER B
3 USER C
4 USER D
5 USER E
6 USER F
MODE
SELECT
Settings 2
2) Press [DOWN ARROW] to scroll to [USER]
files and press [SELECT] to enter the file.
(See "Setting User Information" to establish
a user profile).
C
OMPUTER
RATE 10
MPH-KPH MPH
ODOMETER 00255
AUDIBLE OFF
RETURN
MODE
SELECT
Settings 5
5) Press [SELECT] to enter [RATE]. Use [UP
ARROW] or [DOWN ARROW] to toggle
between 1, 2, 5, 10, 30 seconds for the
recording rate of the console.
[SELECT] to accept changes and reenter
scrolling menu. NOTE: Different recording
rates yield different amounts of total stor-
age time. Refer to the chart on left to select
the most appropriate storage rate. See
Table 2 at left.
Press