Console Setup; Ride Type Selection - CycleOps Comp 200E Console Manual

Console Setup

Ride Type Selection

Press any button to wake up and turn on the
console. If you are using it for the first time,
all data will be stored under [USER A] with
the default settings for a 150 lb male born on
Jan 1, 2004. You may need to reset the con-
sole if there is data from a previous ride
stored on the console (see "Clear Memory"
for details). NOTE: Parameters such as weight
and age do not affect power output readings
on the console. These settings apply only
when analyzing the data on your PC.
R T R
ETURN O IDE
1 USER A
2 USER B
3 USER C
4 USER D
5 USER E
6 USER F
MODE
SELECT
Console Setup 3
3) Press [DOWN ARROW] to scroll through
six (6) [USER] files and press [SELECT] to
choose the user. (See "Setting User
Information" to establish a user profile).
12
CLOCK 02:06:07P
MPH H
WATTS
CAD
MODE
Console Setup 1
1) From the dashboard display press [UP
ARROW] or [DOWN ARROW] to move the cur-
sor to [MENU] and press [SELECT].
R T
IDE YPE
CYCLE COMPUTER
POWER ZONE
HEART RATE ZONE
MODE
Console Setup 4
4) Press [DOWN ARROW] to choose ride
type and press [SELECT] to return to dash-
board display.
MENU
HR
SELECT
SELECT
MAIN MENU
RETURN TO RIDE
SETUP USER RIDE
CLEAR MEMORY
TEST
SETUP
MODE
SELECT
Console Setup 2
2) Press [SELECT] to enter [RETURN TO
RIDE].