Residual Risks; Symbols On The Product; Risk Reduction - Ryobi EXPAND-IT AED05 Original Instructions Manual

● cleaning your product or clearing a blockage
● working on the blade
● checking for any damage after hitting an object
● checking for any damage if the product starts to
vibrate abnormally
● performing maintenance
■ Always ensure that ventilation openings are kept clear
of debris.
■ Make sure the cutting head attachment is properly
installed and securely fastened.
■ Make sure all guards, deflectors, and handles are
properly and securely attached.
■ Do not modify the product in any way, this may increase
the risk of injury to yourself or others.
■ Use only the manufacturer's replacement cutting line.
Do not use any other cutting attachment.
Inspection after dropping or other impacts: Thoroughly
inspect the product and identify any problems or damage
to it. Any part that is damaged should be properly
repaired or replaced by authorized service centre.

RESIDUAL RISKS

Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual risk
factors. The following hazards may arise in use and the
operator should pay special attention to avoid the following:
■ Injury caused by vibration
– Always use the right tool for the job, use designated
handles and restrict working time and exposure.
■ Hearing injury caused by exposure to noise
– Wear hearing protection and limit exposure.
■ Eye injury due to flying debris
– Wear eye protection at all times.

RISK REDUCTION

It has been reported that vibrations from hand-held tools
may contribute to a condition called Raynaud's Syndrome
in certain individuals. Symptoms may include tingling,
numbness and blanching of the fingers, usually apparent
upon exposure to cold. Hereditary factors, exposure to cold
and dampness, diet, smoking and work practices are all
thought to contribute to the development of the symptoms.
There are measures that can be taken by the operator to
possibly reduce the effects of vibration:
■ Keep your body warm in cold weather. When operating
the product, wear gloves to keep the hands and wrists
warm. It is reported that cold weather is a major factor
contributing to Raynaud's Syndrome.
■ After each period of operation, exercise to increase
blood circulation.
■ Take frequent work breaks. Limit the amount of
exposure per day.
If you experience any of the symptoms of this condition,
immediately discontinue use and see your doctor about
these symptoms.
WARNING
Injuries may be caused, or aggravated, by prolonged
use of a tool. When using any tool for prolonged periods,
ensure you take regular breaks.
DESCRIPTION
PARTS
1. Edger attachment shaft
2. Blade guard
3. Gear case
4. Blade
5. Debris flap
6. Adjusting knob
7. Guide wheel
8. Hanger cap
9. Button
10. Guide recess
11. Positioning hole
12. Powerhead shaft
13. Coupler
14. Knob
15. Wheel arm
16. To increase depth
17. To decrease depth
18. Blade depth
19. Slots
20. Flange washer
21. Flange
22. Lower flange washer
23. Blade nut
24. Holding pin
25. Indicator hole
26. Spanner
27. Second hole

SYMBOLS ON THE PRODUCT

Safety alert
Please read the instructions carefully
before using the product.
Wear eye and ear protection.
Direction of edger blade rotation
Keep feet away from rotating blade.
Beware of thrown or flying objects.
Keep all bystanders, especially children
and pets, at least 15 m away from the
operating area.
WARNING
5