Advertisement
Step 2. If you want to use external storage function, please connect the eSATA
cable to the red eSATAIII connector (eSATAIII_1) and the external storage
device. If you want to use internal storage function, please connect the
SATA data cables to the yellow SATAIII connectors (SATAIII_1_2) and the
HDDs.
1. If you use single SATAIII HDD, it is recommended to connect it to SATAIII_1 (top)
connector.
2. The red eSATAIII connector (eSATAIII_1) and SATAIII_2 (bottom) connector cannot
work simultaneously. You can only use either one of them.
Step 3. Connect the chassis HDD LED lead to ASRock SATA3 Card LED header
(HDLED-_CHA and HDLED+_CHA).
Before connecting, please consult the chassis manual for the electrode of the HDD
LED lead. Make sure you connect the HDD LED lead to the corresponding electrode
pin of LED header.
Step 4. Connect the bundled motherboard LED lead to ASRock SATA3 Card LED
header (LED-_MB and LED+_MB) and the system panel header (HDLED-
and HDLED+) on your motherboard.
For the bundled motherboard LED lead, the blue lead is "+" electrode, and the black
lead is "-" electrode. Make sure you connect the correct lead to ASRock SATA3 Card
and system panel header.
o r
2
Advertisement
