ASROCK SATA3 CARD Quick Manual

Sata3 card

Hide thumbs Also See for SATA3 CARD:

I. Introduction

ASRock SATA3 Card is composed of three SATAIII connectors which allow up to

6.0 Gb/s data transfer rate. The red eSATAIII connector (eSATAIII_1) supports

external storage devices, and the yellow SATAIII connectors (SATAIII_1_2)

support internal storage devices. With ASRock SATA3 Card, you can enjoy the

convenience of higher speed data transfer rate on ASRock motherboard.

eSATAIII connector

(eSATAIII_1, red)

Before you install ASRock SATA3 Card on your motherboard, please refer to

below steps carefully.

Step 1. Insert ASRock SATA3 Card into PCIE slot on your motherboard.

A3 Card Quick Guide

LED header

(LED_HEADER, black)

SATAIII connectors

(SATAIII_1_2, yellow)

1: top

2: bottom

Table of Contents

Do you have a question about the SATA3 CARD and is the answer not in the manual?

Page 1 I. Introduction I. Introduction I. Introduction ASRock SATA3 Card is composed of three SATAIII connectors which allow up to 6.0 Gb/s data transfer rate. The red eSATAIII connector (eSATAIII_1) supports external storage devices, and the yellow SATAIII connectors (SATAIII_1_2) support internal storage devices. With ASRock SATA3 Card, you can enjoy the convenience of higher speed data transfer rate on ASRock motherboard.
Page 2 SATA data cables to the yellow SATAIII connectors (SATAIII_1_2) and the HDDs. 1. If you use single SATAIII HDD, it is recommended to connect it to SATAIII_1 (top) connector. 2. The red eSATAIII connector (eSATAIII_1) and SATAIII_2 (bottom) connector cannot work simultaneously.