ASROCK PENRYN1600SLIX3-WIFI User Manual page 8

- Microsoft
OS
Vista
- FCC, CE, WHQL
Certifications
* For detailed product information, please visit our website: http://www.asrock.com
WARNING
Please realize that there is a certain risk involved with overclocking, including adjusting
the setting in the BIOS, applying Untied Overclocking Technology, or using the third-
party overclocking tools. Overclocking may affect your system stability, or even
cause damage to the components and devices of your system. It should be done at
your own risk and expense. We are not responsible for possible damage caused by
overclocking.
CAUTION!
1. FSB1600-CPU will operate in overclocking mode.
2. About the setting of "Hyper Threading Technology", please check page
50.
3. This motherboard supports Untied Overclocking Technology. Please read
"Untied Overclocking Technology" on page 45 for details.
4. This motherboard supports Dual Channel Memory Technology. Before
you implement Dual Channel Memory Technology, make sure to read
the installation guide of memory modules on page 18 for proper
installation.
5. Due to the operating system limitation, the actual memory size may be
less than 4GB for the reservation for system usage under Windows
and Windows Vista
®
64-bit with 64-bit CPU, there is no such limitation.
6. This motherboard supports NVIDIA
you want to use SLI
cards on PCIE1 and PCIE3 slots. If you want to use 3-Way SLI
please install three identical 3-Way SLI
PCIE3 and PCIE5 slots. For the information of the compatible SLI
Way SLI PCI Express VGA cards, please refer to page 10. For the proper
TM
installation of PCI Express VGA card, please refer to the installation guide
on page 20.
7. DTS (Digital Theater Systems) is a multi-channel digital surround sound
format. To enable DTS function, you need to adjust the settings after
audio driver installation. Please refer to "DTS Operation Guide" on page
43 for details.
8. For microphone input, this motherboard supports both stereo and mono
modes. For audio output, this motherboard supports 2-channel, 4-
channel, 6-channel, and 8-channel modes. Please check the table on
page 12 for proper connection.
9. Before installing SATAII hard disk to SATAII connector, please read the
"SATAII Hard Disk Setup Guide" on page 36 to adjust your SATAII hard
disk drive to SATAII mode. You can also connect SATA hard disk to SATAII
connector directly.
Windows 2000 / XP / XP 64-bit / Vista
® ®
64-bit compliant (see CAUTION 16)
TM
. For Windows XP 64-bit and Windows
TM ®
SLI and 3-Way SLI
® TM
function, please install two identical SLI
TM
support graphics cards on PCIE1,
TM
8 8 8 8 8
/
TM
XP
®
Vista
® TM
technology. If
TM
graphics
TM
function,
TM
and 3-
TM