Ide Configuration - ASROCK PENRYN1600SLIX3-WIFI User Manual

ACPI HPET Table
Use this item to enable or disable ACPI HPET Table. The default value is
[Disabled]. Please set this option to [Enabled] if you plan to use this
motherboard to submit Windows
3 . 3 . 4

3 . 3 . 4 IDE Configuration

3 . 3 . 4 IDE Configuration IDE Configuration IDE Configuration
3 . 3 . 4 3 . 3 . 4 IDE Configuration
BIOS SETUP UTILITY
Advanced
IDE Configuration
OnBoard IDE Controller
OnBoard SATA Controller
SATA Operation Mode
IDE1 Master
IDE1 Slave
SATAII_1
SATAII_2
SATAII_3
SATAII_4
SATAII_5
SATAII_6
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
OnBoard IDE Controller
Use this item to enable or disable the "OnBoard IDE Controller" feature.
OnBoard SATA Controller
Use this item to enable or disable the "OnBoard SATA Controller" feature.
SATA Operation Mode
Use this item to adjust SATA Operation Mode. The default value of this option
is [non-RAID]. If you want to operate RAID function on SATA / SATAII HDDs,
please select [RAID].
* If you select [RAID] mode, SATA / SATAII HDDs can not be accessed until you finish
configuring RAID functions in NVIDIA BIOS / Windows RAID Utility.
* If you install OS on SATA / SATAII HDDs, please do not change the setting of this
item after OS installation.
eSATAII Support
Use this item to enable or disable eSATAII support. This item appears only
when "SATA Operation Mode" is set to [RAID]. The default value is [Enabled].
Configuration options: [Enabled] and [Disabled]. If you set this item to
[Enabled], eSATAII ports cannot support RAID functions. If you set this item
to [Disabled], eSATAII port can support RAID functions.
IDE Device Configuration
You may set the IDE configuration for the device that you specify. We will use
the "IDE1 Master" as the example in the following instruction, which can be
applied to the configurations of "IDE1 Slave" as well.
Vista certification.
® TM
Options
Disabled
Enabled
[Enabled]
[Enabled]
[non-RAID]
[Hard Disk]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
Select Screen Select Screen
[Not Detected]
Select Item Select Item
[Not Detected]
+- +- Change Option Change Option
[Not Detected]
F1 F1 General Help General Help
F9 F9 Load Defaults Load Defaults
F10 F10 Save and Exit Save and Exit
ESC ESC Exit Exit
5 4 5 4 5 4
5 4 5 4