ASROCK PENRYN1600SLIX3-WIFI User Manual page 28

eSATAII Connector
(eSATAII_TOP: see p.11, No. 37)
Serial ATA (SATA)
Data Cable
(Optional)
Serial ATA (SATA)
Power Cable
(Optional)
connect to the SATA
HDD power connector
WiFi/E Header
(15-pin WIFI/E)
(see p.11 No. 35)
1
USB 2.0 Headers
(9-pin USB6_7)
(see p.11 No. 19)
This eSATAII connector
supports SATA data cable for
external SATAII function. The
current eSATAII interface
allows up to 3.0 Gb/s data
eSATAII_TOP
transfer rate.
Either end of the SATA data cable
can be connected to the SATA /
SATAII hard disk or the SATAII
connector on this motherboard.
You can also use the SATA data
cable to connect SATAII_6
(PORT3.1) connector and eSATAII
connector.
Please connect the black end of
SATA power cable to the power
connector on each drive. Then
connect the white end of SATA
power cable to the power
connect to
the power
connector of the power supply.
supply
This header supports WiFi+AP
function with ASRock
USB+5V_2
TXN
WiFi-802.11g or WiFi-802.11n
TXP
GND2
PCIE_RST#
module, an easy-to-use wireless
+3SVB
RXN RXP
local area network (WLAN)
PexCLK
adapter. It allows you to create a
GND1
PexCLK#
D0- D0+
Dummy
USB+5V_1
wireless environment and enjoy the
convenience of wireless network
connectivity.
Besides four default USB 2.0
USB_PWR
ports on the I/O panel, there are
P-7
P+7
GND
two USB 2.0 headers on this
DUMMY
motherboard. Each USB 2.0
1
header can support two USB
GND
P+6
P-6
2.0 ports.
USB_PWR
2 8 2 8 2 8
2 8 2 8