ASROCK PENRYN1600SLIX3-WIFI User Manual page 34

How to install eSATAII?
SATAII connector
SATAII_6 (PORT3.1)
1. In order to enable the eSATAII port of the I/O shield, you need to connect the
orange SATAII connector (SATAII_6 (PORT3.1); see p.11 No.12) and the eSATAII
connector (eSATAII_TOP; see p.11 No.37) with a SATA data cable first.
Connect the SATA data
cable to the orange
SATAII connector
(SATAII_6 (PORT3.1))
2. Use the eSATAII device cable to connect eSATAII device and the eSATAII port of
the I/O shield.
Connect one end of the eSATAII
device cable to eSATAII device
eSATAII connector
(eSATAII_TOP)
Connect the SATA
data cable to the
eSATAII connector
(eSATAII_TOP)
Connect the other end of the eSATAII
device cable to eSATAII port of the I/O
shield
3 4 3 4 3 4
3 4 3 4