ASROCK PENRYN1600SLIX3-WIFI User Manual page 51

Memory Timings
Use this item to select the Memory Timings feature. Configuration options:
[Auto] and [Manual]. If [Manual] is selected, you can adjust the following memory
timings.
TCL (CAS Latency)
Use this item to adjust the means of memory accessing. Configuration
options are [3], [4], [5], [6] and [Auto].
TRCD
Use this item to adjust the TRCD value. Configuration options are [1], [2],
[3], [4], [5], [6], [7] and [Auto].
TRP
Use this item to adjust the TRP value. Configuration options are [1], [2],
[3], [4], [5], [6], [7] and [Auto].
TRAS
Use this item to adjust the TRAS value. Configuration options are [1] to
[31] and [Auto].
Command Per Clock (CMD)
Use this item to adjust the Command Per Clock (CMD) value. Configura-
tion options are [1T], [2T] and [Auto].
TRRD
Use this item to adjust the TRRD value. Configuration options are [1] to
[15] and [Auto].
TRC
Use this item to adjust the TRC value. Configuration options are [1] to [31]
and [Auto].
TWR
Use this item to adjust the TWR value. Configuration options are [2], [3],
[4], [5], [6] and [Auto].
TWTR
Use this item to adjust the TWTR value. Configuration options are [1] to
[15] and [Auto].
Memory Remap Feature
Use this item to enable or disable memory remap feature. Configuration options:
[Enabled] and [Disabled]. The default value is [Enabled].
Primary Graphics Adapter
This allows you to select [PCI] or [PCI Express] as the boot graphic adapter
priority. The default value is [PCI].
Hyper Transport Link Speed
This allows you to select Hyper Transport Link Speed. Configuration options:
[200 MHz], [400 MHz], [600 MHz], [800 MHz] and [1000 MHz]. The default
value is [1000 MHz].
5 1 5 1 5 1
5 1 5 1