Chipset Configuration - ASROCK PENRYN1600SLIX3-WIFI User Manual

Hyper Threading Technology
To enable this feature, it requires a computer system with an Intel Pentium
processor that supports Hyper-Threading technology and an operating system
that includes optimization for this technology, such as Microsoft
XP. Set to [Enabled] if using Microsoft
2.4.18 or higher. This option will be hidden if the installed CPU does not sup-
port Hyper-Threading technology.
Intel (R) SpeedStep(tm) tech.
Intel (R) SpeedStep(tm) tech. is Intel's new power saving technology. Proces-
sor can switch between multiple frequency and voltage points to enable power
savings. The default value is [Auto]. Configuration options: [Auto], [Enabled]
and [Disabled]. If you install Windows
the "Power Schemes" as "Portable/Laptop" to enable this function. If you
install Windows Vista
® TM
to [Enabled]. This item will be hidden if the current CPU does not support Intel
(R) SpeedStep(tm) tech..
Please note that enabling this function may reduce CPU voltage and lead to system
stability or compatibility issue with some power supplies. Please set this item to
[Disable] if above issue occurs.
3 . 3 . 2 3 . 3 . 2

3 . 3 . 2 Chipset Configuration

3 . 3 . 2 3 . 3 . 2 Chipset Configuration Chipset Configuration Chipset Configuration Chipset Configuration
BIOS SETUP UTILITY
Advanced
Chipset Configuration
DRAM Frequency
Flexibility Option
Memory Timings
Memory Remap Feature
Primary Graphics Adapter
Hyper Transport Link Speed
Onboard LAN
OnBoard 1394
OnBoard HD Audio
Front Panel
CPU Voltage
DRAM Voltage
NB Voltage
SB Voltage
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s) in-
serted and assigns appropriate frequency automatically. You may select
[266MHz (DDRII533)], [333MHz (DDRII667)], [400MHz (DDRII800)] or [Manual].
Flexibility Option
The default value of this option is [Disabled]. It will allow better tolerance for
memory compatibility when it is set to [Enabled].
Windows XP, or Linux kernel version
® ®
XP and select [Auto], you need to set
®
and want to enable this function, please set this item
Options
Auto:
[Auto]
266MHz (DDRII533)
[Disabled]
333MHz (DDRII667)
[Auto]
400MHz (DDRII800)
[Enabled]
Manual
[PCI]
[1000 MHZ]
[Enabled]
[Enabled]
Select Screen
Select Item
[Auto]
+ - Change Option
[Auto]
F1 General Help
[Auto]
F9 Load Defaults
[Auto]
F10 Save and Exit
[Auto]
ESC Exit
[Auto]
5 0 5 0 5 0
5 0 5 0
4
®
Windows
® ®