Seiting The Beep Tone; Maintenance - Aiwa CT-ZI09 Operating Instructions Manual

SETTING THEBEEP TONE
MAINTENANCE
The beep function is deactivated at the factory.
To have a beep sound each time you press any
button other than 4, REW, or FF, follow the
procedure below.
1 With the unit on, press 1 and 4 at the
same time.
Each time you press them, this function turns
on or off.
The beep function is activated when you
hear a beep.
Cleaning the front panel
When the front panel is soiled, wipe the surface
of the panel with a dry and soft cloth.
Cleaning the tape head
Use a cleaning cassette to clean the playback
head and capstans approximately once a month.
If the playback head is dirty, the high tones may
not be reproduced properly.
11 ENGLISH