Connecting A Portable Cd/Md/Mp3 Player Or Other Equipment; Setting The Beep Tone; Setting The Contrast Control - Aiwa CT-FX530M Operating Instructions Manual

CONNECTING A
PORTABLE CD/MD/MP3
PLAYER OR OTHER
EQUIPMENT
This unit is equipped with a line-level input (AUX
IN) jack, enabling high sound quality.
1
Connect a portable CD/MD/MP3 player,
etc. via the AUX IN jack (3.5-mm dia.) of
the unit.
2
Press FUNC repeatedly to select AUX
IN mode.
The "AUX IN" indication appears.
3
Start playback from the connected
equipment.
• For further information on the portable CD/MD/
MP3 player, etc., refer to the operating
instructions for that equipment.

SETTING THE BEEP TONE

The unit is preset at the factory to beep each time
you press any button on the front panel except %
or z (no beep with the Jog Dial). You can mute
this beeping by following the procedure below.
1
With the unit off, press and hold SEL for
more than 2 seconds.
2
Rotate the Jog Dial to select "BEEP
ON" or "BEEP OFF".
3
Press SEL.
The unit turns off.
SETTING THE CONTRAST
CONTROL
You can change the contrast of the display.
1
With the unit on, press and hold FUNC
for more than 2 seconds.
The current contrast indication appears.
2
Rotate the Jog Dial to select the contrast
from among the following three levels.
CONT.L
CONT.M (factory setting)
CONT.H
14
ENGLISH
tousi-E-15