Camera Settings; Camera Trigger Control; Parking Assist Guidelines Setting - Boss Audio Systems ELITE BE10ACP User Manual

System Settings

Camera Settings

> [Camera] to
From the home menu, touch
access camera settings.

Camera Trigger Control

[Rear Camera]: Enable or disable rear camera
signal input.
[Rear Camera Power]: Enable or disable rear
camera power output. The option is invisible
when [Rear Camera] is turned off.
[Front Camera]: Enable or disable front camera
signal input.
[Front Camera Power]: Enable or disable front
camera power output. The option is invisible
when [Front Camera] is turned off.
[Rear Camera View]: Enable or disable rear
camera view.
[Front Camera View]: Enable or disable front
camera view.
[Rear View Delay]: Delay trigger of rear camera
view by a set time (0/0.1/0.5/1/2 seconds). A
proper time setting prevents the unit's screen
from blinking when shifting gears.
IMPORTANT NOTE
For automatic rear camera trigger, make sure
the purple/white wire (labeled "REVERSE") is
connected to the reverse light. (P.27)

Parking Assist Guidelines Setting

[Parking Assist Guide]: Disable the parking
assist guidelines built in the unit if your rear
camera view has its own parking assist guides.
[Parking Assist Guide Adjust]: Adjust the
parking assist guidelines built in the unit.
Touch and drag a square icon to reposition the
related guideline. Repeatedly touch an arrow
icon to fine tune positioning of the related guide
line. Touch [OK] to confirm the adjustment.
To reset to the default positioning of the guide
lines, touch [Reset].
21