Oc Tweaker Screen - ASROCK P43C-ME User Manual

3.3 3.3 OC T 3.3 OC T OC Tweak OC T weak weaker Screen weak er Screen er Screen er Screen
3.3 3.3 OC T weak er Screen
In the OC Tweaker screen, you can set up overclocking features.
Main OC Tweaker Advanced
OC Tweaker Settings
Load Optimized CPU OC Setting
DRAM Frequency
DRAM Timing Control
Ratio Status Unlocked (Min:12, Max:17)
Ratio CMOS Setting 17
Intel (R) SpeedStep (tm) tech.
Overclock Mode
CPU Frequency (MHz)
PCIE Frequency (MHz)
Vcore
CPU Voltage
DRAM Voltage
1.96 V
GTLRef Voltage
0.63Vtt
NB Voltage
1.11V
SB Core Voltage
1.52V
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Load Optimized CPU OC Setting
You can use this option to load the optimized CPU overclocking setting.
Please note that overclocing may cause damage to your CPU and
motherboard. It should be done at your own risk and expense.
DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s)
inserted and assigns appropriate frequency automatically. You may select
[Auto], [333MHz DDR2_667], [400MHz DDR2_800], [533MHz DDR2_1066]
or [600MHz DDR2_1200] for DDR2. You may select [Auto], [400MHz
DDR3_800], [533MHz DDR3_1066], [667MHz DDR3_1333] or [800MHz
DDR3_1600] for DDR3.
DRAM Command Rate
This option appears only when you adopt DDR3 memory modules. Use this
to select among [2N] and [1N] for DRAM Command Rate. The default value
is [Auto].
BIOS SETUP UTILITY
H/W Monitor Boot Security
Overclocking may cause
[Press Enter]
damage to your CPU and
motherboard.
[Auto]
It should be done at
your own risk and
expense.
[17]
[Enabled]
[Auto]
[266]
[100]
Select Screen
Select Item
: 1.232V
Enter Go to Sub Screen
[Auto]
F1 General Help
[Auto]
F9 Load Defaults
[Auto]
F10 Save and Exit
[Auto]
ESC Exit
[Auto]
3 7 3 7 3 7
3 7 3 7
Exit