Driver Installation Guide; Installing Windows ® 7 / 7 64-Bit / Vista; Vista Tm 64-Bit / Xp / Xp 64-Bit Without Raid Functions; Installing Windows Xp / Xp 64-Bit Without Raid Functions - ASROCK P43C-ME User Manual

Hide thumbs Also See for P43C-ME:
Table of Contents

Advertisement

2 . 1 4 Driver Installation Guide

2 . 1 4
2 . 1 4
Driver Installation Guide
Driver Installation Guide
Driver Installation Guide
2 . 1 4
2 . 1 4
Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical drive
first. Then, the drivers compatible to your system can be auto-detected and listed on
the support CD driver page. Please follow the order from up to bottom side to install
those required drivers. Therefore, the drivers you install can work properly.
2.15
2.15 Installing Windows
2.15
Installing Windows
Installing Windows
Installing Windows
2.15
2.15
Installing Windows
Vista
Vista
Vista
Vista
Vista
64-bit / XP / XP 64-bit Without RAID Functions
64-bit / XP / XP 64-bit Without RAID Functions
64-bit / XP / XP 64-bit Without RAID Functions
64-bit / XP / XP 64-bit Without RAID Functions
64-bit / XP / XP 64-bit Without RAID Functions
TM
TM
TM
TM
TM
If you want to install Windows
OS on your SATA / SATAII HDDs without RAID functions, please follow below
procedures according to the OS you install.
2.15.1
2.15.1
Installing Windows
Installing Windows
2.15.1
2.15.1
2.15.1
Installing Windows
Installing Windows
Installing Windows
Functions
Functions
Functions
Functions
Functions
If you want to install Windows
without RAID functions, please follow below steps.
Using SATA / SATAII HDDs with NCQ function
STEP 1: Set Up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set "SATAII Configuration" to [Enhanced], and then in the option "Configure
SATAII as", please set the option to [AHCI].
STEP 2: Make a SATA / SATAII driver diskette.
A. Insert the Support CD into your optical drive to boot your system.
B. During POST at the beginning of system boot-up, press <F11> key, and then a
window for boot devices selection appears. Please select CD-ROM as the boot
device.
C. When you see the message on the screen, "Do you want to generate Serial
ATA driver diskette [YN]?", press <Y>.
D. Then you will see these messages,
Please insert a diskette into the floppy drive.
WARNING! Formatting the floppy diskette will
lose ALL data in it!
Start to format and copy files [YN]?
Please insert a floppy diskette into the floppy drive, and press <Y>.
E. The system will start to format the floppy diskette and copy SATA / SATAII
drivers into the floppy diskette.
7 / 7 64-bit / Vista
7 / 7 64-bit / Vista
7 / 7 64-bit / Vista
® ® ® ® ®
7 / 7 64-bit / Vista
7 / 7 64-bit / Vista
7 / 7 64-bit / Vista
/ Vista
®
TM
XP / XP 64-bit Without RAID
XP / XP 64-bit Without RAID
XP / XP 64-bit Without RAID
XP / XP 64-bit Without RAID
XP / XP 64-bit Without RAID
® ® ® ® ®
XP / XP 64-bit OS on your SATA / SATAII HDDs
®
Advanced screen
Storage Configuration.
3 2
3 2
3 2
3 2
3 2
/ / / / /
TM
TM
TM
TM
TM
64-bit / XP / XP 64-bit
TM

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

P43c-me - v1.0

Table of Contents